AX-65

Category: Diffusions Pumps Available
For more information, visit our official website at elsotech.com.my

Description

The AX-65 diffusion pump is a high-performance, air-cooled pump designed with bench-top analytical instruments in mind. Its vertical finned boiler and high power provide stable pumping and high helium pumping speed. This pump can be ordered with a cold cap or a dense baffle. The pump includes a fluid-level sight glass that indicates the fluid level at all times.

Technical Specifications

Pumping Speed, Operating Range 65 l/sec Air, 90 l/s He and H2
Maximum Throughput 0.19T-l/s (0.25 mbar-l/s) in operating range 0.30T-l/s (0.40 mbar-l/s) @ 0.01 torr  
Compression Ratio 4 x 107 (Air), 2 x 106 (helium)
Operating Range 3 x 10-3 to <5 x 10-8 torr (3.9 x 10-3 to 6.5 x 10-8 mbar)
Maximum Forepressure No load: 0.75 torr (1.00 mbar) Full Load: 0.60 torr (0.78 mbar)
Backstreaming Rate With cold cap: <2 x 10-4 mg/cm2/min With baffle: <2 x 10-5 mg/cm2/min
Recommended Backing Pump ≥1.5 cfm (2.5 m3/hr)
Warmup Time 7 minutes
Cooldown Time 10 minutes
Fluid Charge 30 cc
Electrical Requirements 1 ph, 50/60 Hz, 90/115/165/220 VAC
Pump Power 200/250 watts
Air Cooling 30 cfm

 

Speed Curve Graph

Pumping Speed/Cold Cap Pumping speed/Halo Baffle Throughput

Outline Drawing

AX-65 Diffusion Pump Outline Drawing

Description Wt. kg (lbs) Part Number
AX-65 Pumps   KF-50 ISO-6
AX-65 with standard cold cap, 115 V, 250 W 3.6 (8.0) L9670301 L9707301
AX-65 with internal baffle, 115 V, 250 W 3.6 (8.0) L9670311 L9707311
AX-65 with standard cold cap, 220 V, 250 W 3.6 (8.0) L9670302 L9707302
AX-65 with internal baffle, 220 V, 250 W 3.6 (8.0) L9670312 L9707312
AX-65 with standard cold cap, 115 V, 200 W 3.6 (8.0) L9670303 L9707303
AX-65 with internal baffle, 115 V, 200 W 3.6 (8.0) L9670313 L9707313
AX-65 with standard cold cap, 220 V, 200 W 3.6 (8.0) L9670304 L9707304
AX-65 with internal baffle, 220 V, 200 W 3.6 (8.0) L9670314 L9707314
AX-65 with standard cold cap, 90 V, 250 W 3.6 (8.0) L9670305 L9707305
AX-65 with internal baffle, 90 V, 250 W 3.6 (8.0) L9670315 L9707315
AX-65 with standard cold cap, 165 V, 250 W 3.6 (8.0) L9670306 L9707306
AX-65 with internal baffle, 165 V, 250 W 3.6 (8.0) L9670316 L9707316
 
Description Wt. kg (lbs) Part Number
Accessories
Santovac 5 diffusion pump fluid, 40 cc 0.5 (1.0) 695405001
Santovac 5 diffusion dump fluid, 65 cc 0.9 (2.0) 695405002
DC-704 diffusion pump fluid, 500 cc 1.4 (3.0) 695474005
DC-705 diffusion pump fluid, 500 cc Internal baffle kit 1.4 (3.0) 
0.9 (2.0)
695475005
R1160065
Centering ring for inlet flange, NW50 0.5 (1.0) KC50SB
Centering ring for inlet flange, ISO-63 0.2 (0.5) IC063SV
Centering ring for foreline flange, NW16 0.2 (0.5) KC16SB
Instruction manual   699901062
Replacement Parts (one heater harness required per pump)
200 W, 115 V heater harness (for use with DC-704 and DC-702) 0.5 (1.0) L9994307
250 W, 115 V heater harness (for use with DC-705 and Santovac 5) 0.5 (1.0) L9994303
200 W, 220 V heater harness (for use with DC-704 and DC-702) 0.5 (1.0) L9994308
250 W, 220 V heater harness (for use with DC-705 and Santovac 5) 0.5 (1.0) L9994304
250 W, 90 V heater harness (for use with DC-705 and Santovac 5) 0.5 (1.0) L9994301
250 W, 165 V heater harness (for use with DC-705 and Santovac 5) 0.5 (1.0) L9994302
Overtemperature thermal switch (included with each heater harness) 0.5 (1.0) L9964001
Pump ready thermal switch (optional) 0.5 (1.0) L9964002
 

More detail about ELSO Technologies Sdn Bhd
ELSO Technologies Sdn Bhd
ELSO Technologies Sdn Bhd Test & Measurement Equipment Distributor Penang, Malaysia, NetAlly, Rigol, Cromwell Distributor Singapore, Selangor, KL, Sarawak ~ ELSO Technologies Sdn Bhd
Contact Us flagMalaysia