TRACK WELDING CARRIAGE RAIL BULL

TRACK WELDING CARRIAGE RAIL BULL

LAST UNIT OFFER!!!



Overview



Rail Bull is suitable for work in both horizontal and vertical positions
 
The Rail Bull welding carriage is supplied in a metal box including:
 
  • welding carriage
  • metal box
  • cross slide assembly
  • short rod torch holder with clamp
  • cable anchor power cord 3 m (10 ft)
  • arc ignition cable of 6.5 m (21 ft) 3 mm hex wrench
  • 4 mm hex wrench
  • operator’s manual

Specification

Voltage 1~ 115–230 V ; 50–60 Hz
Power 100 W
Welding positions – Horizontal PA (flat) & PB (horizontal vertical) & PC (horizontal)
Welding positions – Vertical PF (vertical up) & PG (vertical down)
Minimum track curvature radius 5 m (16 ft)
Torch type MIG/MAG
Torch diameter 16–22 mm (0.63–0.87’’); up to 35mm (1.38”) option
Minimum workpiece thickness 5 mm (0.20’’)
Horizontal pulling force 350 N
Vertical pulling force 150 N
Cross slide adjustment range 0–35 mm (0–1.38’’) up-down & left-right
Horizontal speed 0–120 cm/min (0–47.2 in/min)
Vertical speed 0–110 cm/min (0–43.3 in/min)
Oscillation type linear
Oscillation path trapezoid ; triangle ; straight line
Oscillator arm stroke 0–100 mm (0–3.9’’)
Oscillation width 0–50 mm (0–1.9’’)
Oscillation speed 0–1500 mm/min (0–59.0 in/min)
Oscillation delay at center and on ends 0–5 s
Maximum oscillator pulling force 100 N
Weight 20 kg (44 lbs)


Dimension for Rail Bull: