The patented, compact Micromag magnetic filter can benefit many different industries.
Contaminated fluid enters the inlet port where it is dispersed by the unique tapered radial flow channels. Fluid passes down the outside of the centrally mounted rare earth magnetic core which captures contamination particles along its length, resulting in excellent filtration efficiency.The geometry of the magnetic flux circuit means that contamination builds up in a controlled way, ensuring that the filter can never block, irrespective of how much contamination is held. Channels remain open allowing fluid too continue to flow freely.
The filtered fluid flows through the return slots located in the upper section of the magnetic core, down through the centre and exits through the outlet port.
Cleaning
Using the supplied cleaning tool, a fully contaminated core can be cleaned in under 30 seconds. Only metallic particles are removed from the filter and these can be easily disposed. There are no dirty cartridges!
Application
Grinding, edm machine, laser cutting, super finishing, wash station
Material
Mild steel, cast iron sub micron chips and particle
Installation Location
Pre- or post-pump, delivery line, spindle feed or premembrane cartridge.
| Part Number | Diameter | Port Size |
Capacity (kgs) |
Max Flow Rate (ltrs/min) |
||
|---|---|---|---|---|---|---|
| A | B | C | ||||
| MM5 | 190 | 105 | 95 | 1˝ BSP | 1 | 70 |
| MM10 | 315 | 125 | 100 | 1˝ BSP | 2 | 100 |
| MM20 | 605 | 135 | 100 | 1½˝ BSP | 4 | 150 |
| Maximum Pressure | 12 Bar g |
|---|---|
| Magnetic Performance | High intensity |
| Circuit Design | Open |
| Magnetic Material | rare earth neodymium iron boron |
| Magnet Grade | N45 – Inspected & confirmed via hystergraph prior to use |
| Temperature | 5°C to 50°C |
| Housing | Styrene Acrylo Nitrile (SAN) |
|---|---|
| Lid | Marine grade aluminium, anodised blue |
| Magnetic Core | 304 Grade Stainless Steel |
| Sealing | Nitrile O-ring |
Malaysia
