Imada Standard Type Vertical Motorized Test Stand (MX2 Series)

 

 

Japan Model	MX2-500N	MX2-1000N	MX2-2500N	MX2-5000N
US Model	MX2-110	MX2-275	MX2-550	MX2-1100
Capacity	500N (50kgf)	1000N (100kgf)	2500N (250kgf)	5000N (500kgf)
Test speed	Digital 10 to 300mm/min [10 – 20mm/min: by 0.5mm/min] [20 – 100mm/min: by 5mm/min] [100 – 300mm/min: by 10mm/min]			Digital 0.5 to 300mm/min [0.5 – 20mm/min: by 0.5mm/min] [20 – 100mm/min: by 5mm/min] [100 – 300mm/min: by 10mm/min]
Max. height of a sample (*1)	Approx. 235mm	Approx. 300mm	Approx. 320mm	Approx. 380mm
Rigidity	Standard models] less than 0.5mm,
	[Long stroke (optional)] less than 1.0mm			[extended column (optional)] less than 1.0mm
Stroke Limit	Controllable with upper and lower knob
Measuring Modes	Manual / Jog / Cycle mode
Functions	Counter (number of tests to repeat): Max. 65535 times Timer (pausing time): Up to 99 min 59 sec 9 (by 0.1 sec)
Control	Emergency stop, force control (*2), overload prevention (*2, *3)
Operating temperature humidity	0 to +40 degree Celsius 35 to 70% (avoid condensation)
Voltage	AC100 to 240V, 50/60Hz (Select from 100, 120 and 230V. Accessories are provided accordingly.)
Power Consumption	50W			150W
Weight	Approx. 18kg	Approx. 19kg	Approx. 26kg	Approx. 51kg
Accessories	Operation manual, power cable, spare fuse, tools			Operation manual, power cable, spare fuse, tools, carrying handle, yellow cap
	GF-1 (Grip mounting adaptor)	GF-2 (Grip mounting adaptor), Mounting plate for high capacity force gauge	GF-2 (Grip mounting adaptor), Mounting plate for standard force gauge
Available Options *4*5*6	-L: Extended stroke by 200mm -2L: Extended stroke by 400mm (*7) -CN: External signal input -S: Length scale -FA: Inbuilt linear scale -V45: Speed 1.5 to 45mm/min -V90: Speed 3 to 90mm/min -V450: Speed 15 to 450mm/min -V600: Speed 20 to 600mm/min -V900: Speed 30 to 900mm/min	-L: Extended stroke by 300mm -CN: External signal input -S: Length scale -FA: Inbuilt linear scale -V75: Speed 2.5 to 75mm/min -V150: Speed 5 to 150mm/min -V750: Speed 25 to 750mm/min -V1000: Speed 35 to 1000mm/min	-L: Extended stroke by 300mm -CN: External signal input -S: Length scale -FA: Inbuilt linear scale -V75: Speed 2.5 to 75mm/min -V150: Speed 5 to 150mm/min	-EXT: Extended column by 200mm (*8) -CN: External signal input -S: Length scale -FA: Inbuilt linear scale
Mountable Force Gauge *9	Mechanical Force Gauge: FB, PS, PSM series Digital Force Gauge: DST, DSV, ZTS, ZTA series (up to 1000N) Load cell: DPU series (up to 500N *10)
	-	Mechanical Force Gauge: PSH series Digital Force Gauge: ZTS, ZTA series (Over 2500N)

*1 Max. sample height refers to the distance between the table and the tip of force gauge measuring shaft when the head is at the top. (MX2-500N/MX2-1000N: up to 1000N model of ZTS/ZTA series, MX2-2500N/MX2-5000N: With over 2500N model of ZTS/ZTA series is mounted.)
*2 ZTS/ZTA series force gauge and optional cable CB-528 are required.
*3 It does not guarantee complete protection against overloading.
*4 Add the option code after the model name to complete the model with options. e.g. When adding long stroke option to MX2-500N … Model: MX2-500N-L
*5 Capacity is reduced as below by some speed change options. MX2-500N: -V600 capacity 250N, –V900 capacity 150N MX2-1000N:-V750 capacity 500N, –V1000 capacity 250N
*6 Amplifier such as ZTA and FA Plus2 (sold separately) or software are required to record measuring value of linear scale.
*7 Additional charge for wooden packing (Japan domestic shipping) or LVL wooden packing (oversea shipping) are required for shipping.
*8 The stroke does not extend. It extends the column of test stand and max. sample height is approx. 580mm.
*9 Ensure to use within the capacity of force gauge and test stand regardless of the mountable models.
*10 Mounting block (sold separately) is required to mount over 1000N range of DPU to MX2-1000N/MX2-2500N/MX2-5000N