Cedar Digital Torque Wrench (DIW Series)

Cedar Digital Torque Wrench (DIW Series)

Danh mục: Torque Equipment Có sẵn
Để biết thêm thông tin, truy cập trang web chính thức của chúng tôi tại mspmetrology.com.my

Mô tả

Digital Torque Wrench DIW Series is designed for verification of application or removal of torque bolts by MSP Metrology (M) Sdn Bhd from Cedar Japan.


Features
DIW series (120/75/20/15)

For tightening and final check of screws & bolts
The wrench head part can rotate about 300 degrees! The eyes and the display board can be always parallel and improves operability.
Lightweight and compact with integrated display !
Cordless type and improves operability. Enable to stably measure for long continuous use.Screw tightening counter function is also installed as standard.
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.

- The wrench head part can rotate about 300 degrees
- Lightweight and compact with integrated display
- 800 items of Memory data
- USB shape of Data output
- Settable upper limit and lower limit torque
- Notify the set value with buzzer & LED lamp
- Built-in tightening counter
- Rechargeable battery drive
- Auto power off safe operation
- Real time data output
- The lineup of the DIW series is DIW-15, DIW-20, DIW-75, DIW-120

- Programmable screw tightening counter
- Programmable Auto Zero function resets unit to zero for easy operation
- Both CW and CCW operation
- ASCII format output (USB)
- Runs on internal Ni-MH batteries (for 12 hours) Auto shut-off after 10 min. of non-use
- AC charger and carrying case included.

Yes-No Conditions Etc. Can Save Five Channels

- A channel is only changed even if bolting conditions change.
- It is not necessary to reset up a maximum value and a minimum value one by one like former.

Full Specifications

Specification DIW-15 DIW-20 DIW-75 DIW-120
Measuring Range (At time of Track)

0.20 ~ 15 Nm

2.0 ~ 150 kgf・cm

2.0 ~ 130 lbf・in

0.20 ~ 20 Nm

2.0 ~ 200 kgf・cm

2.0 ~ 174 lbf・in

0.20 ~ 75 N・m

2.0 ~ 750 kgf・cm

2.0 ~ 650 lbf・in

2.0 ~ 120 N・m

20 ~ 1200 kgf・cm

20 ~ 1040 lbf・in

Accuracy ±0.5% (199 or less digit ±1 digit) ±0.5% (499 or less digit ±3 digit) ±0.5% (199 or less digit ±1 digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring 
mode
P-P Peak Peak load value hold
T-R Track Indication of real time torque value (Used for Zero-Adjustment)
P-D Peak down Holding Load Value at the moment to change from upward to downward
C Real-time output Load torque value is outputted every about 1/160 second
Decision 
function
Setting of torque value Programmable High and Low setpoints with both audible beep and Green/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum, and the average value The data number, the maximum, the minimum value, and the average value of memory data are displayed.
A setup of the number of counts One to 99 count (count in a direction with a bundle)
Data spec Data transfer ASCII format (Baud rate: 19200)
Data memory 800 data
Power supply Ni-Cd chargeable battery 1.2V x 5 cells 700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time   From empty – less than 5hours
Continuous working time 12 hours
Outside size φ34(grip) × 236(L) φ34(grip) × 235(L) φ34(grip) × 320(L) φ34(grip) × 445(L)
  Weight 430g 470g 620g 830g
Socket engagement 6.35  square, including steel ball 9.5 square, including steel ball 12.7 square, including steel ball
Attachment One-way socket
Accessories
 (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Xem thêm chi tiết về MSP Metrology (M) Sdn Bhd
MSP Metrology (M) Sdn Bhd
MSP Metrology (M) Sdn Bhd Video Measuring Machine Johor Bahru (JB), Digital Microscope Supplier Malaysia, Selangor, Hardness Tester Supply Kuala Lumpur (KL), Penang, Singapore ~ MSP Metrology (M) Sdn Bhd