About TAKISAWA NEX-908
| ITEMS | UNIT | NEX-908 | |||
| CAPACITY | Maximum Swing | mm | 670 | ||
| Swing On Cross Slide | mm | 450 | |||
| Standard Turning Diameter | mm | 250 | |||
| Max Turning Diameter | mm | 330 | |||
| Max Turning Length | mm | 551 | |||
| Max Bar Work Capacity | mm | 52(65)/35(52) | |||
| TRAVEL | X-Axis Travel | mm | 220 | ||
| Z-Axis Travel | mm | 630 | |||
| Y-Axis Travel | mm | ±50 | |||
| B Axis Travel | mm | 710 | |||
| SPINDLE | Spindle Speed | rpm | 5,000 | ||
| Chuck Size | 6” | ||||
| Spindle Nose | A2-5(A2-6) | ||||
| Through HoleDia | mm | 46(63) | |||
| Bearing Diameter | mm | 90(100) | |||
| TURRET | Number Of Tool | T12 | |||
| Turning Tool Shank | mm | 25 | |||
| Boring Bar Shank Dia | mm | 40 | |||
| Milling Speed | rpm | 6,000 | |||
| Max Bush Diameter | mm | 20 | |||
| Sub Spindle | Spindle Speed | rpm | 5,000 | ||
| Chuck Size | 6” | ||||
| Spindle Nose | A2-5(A2-6) | ||||
| Through Hole Diameter | mm | 44 | |||
| Bearing Diameter | mm | 90 | |||
| FEEDRATE | X-Axis Rapid Traverse Rate | m / min | 20 | ||
| Z-Axis Rapid Traverse Rate | m / min | 24 | |||
| Y-Axis Rapid Traverse Rate | m / min | 10 | |||
| B-Axis Rapid Traverse Rate | m/min | 20 | |||
| MOTOR | Spindle Drive Motor | kw | 11/18.5(11/15) | ||
| Sub Spindle Drive Motor | kw | 5.5/7.5(7.5/11) | |||
| Turret Index Motor | kw | 1.2 | |||
| X Axis Drive Motor | kw | 2.5 | |||
| Z Axis Drive Motor | kw | 2.5 | |||
| Y Axis Drive Motor | kw | 2.5 | |||
| B Axis Drive Motor | kw | 1.2 | |||
| Milling Motor | kw | 3.7/5.5(5.5/7.5) | |||
| SIZE | Height | mm | 2,165 | ||
| Width | mm | 1,954 | |||
| Depth | mm | 3,020 | |||
| Weight | kg | 6,000 | |||
| •Specification is subject to change without further notice. | |||||
