The Hanatek Precision Thickness Gauge (LAB) FT3-V is specifically designed for use by testing laboratories. Compliance to multiple standards is achieved by varying the weight applied to the measurement platen and interchangeable measuring heads to vary the contact area.
The instrument is specifically designed to quickly and accurately measure the thickness of a variety of substrates including film, paper, board, foil, tissue and textiles.
Operated via an intuitive touch screen interface the instrument will allow the user to define batch size, dwell time & measuring speed.
Full test statistics can be easily viewed or printed to label for easy documentation control.
Contact pressure varied by adding additional weights to measurement platen. Contact area is variable from 6 - 50 mm
Test Parameters
Physical test parameters can be factory configured according to International Standards or customer requirements. Measurement speed and dwell time are controlled by user defined parameters.
Instrument
The instrument is linearised throughout its measurement range using a multi point calibration.
Flatness of measurement head/anvil <0.1µm Typical parallelism <1µm
Operator
The Hanatek instrument provides full statistical analysis of data. The optional printer allows a time/date stamped results label to be attached to job sheet or retained samples
User defined routines or the optional footswitch mean hands free operation for easy sample manipulation
Temperature
Temperature stability circuitry ensures the instrument electronics reach optimum conditions before testing.
BS 2782-6
Methods of testing plastics. Dimensional properties. Determination of thickness by mechanical scanning of flexible sheet
DIN 53370
Testing of plastics films - Determination of the thickness by mechanical scanning
ISO 4593:1993 Part A OR B
Standard Guide for determination of Thickness of Plastic Film Test Specimens
ISO 534 : 2005
Paper and board. Determination of thickness, density and specific volume
DIN 53105
BS EN 20534
Method for determination of thickness and apparent bulk density or apparent sheet density of paper and board
TAPPI T 411
Thickness of Paper and Paperboard (Soft Platen Method), Test Method T 551 om-06
SCAN P7/P31
FEFCO No 3
ISO 3034
Corrugated fibreboard. Determination of the thickness of corrugated fibreboard
DIN EN 1942
Self adhesive tapes - Measurement of Thickness
BS EN 12625-3
Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density
SCAN P47
BS 7387
Method for determination of the bulking thickness, apparent bulk density, compressibility and compressibility index of soft creped tissue paper
ISO 5084
Determination of thickness of textiles and textile products
ASTM D1777
Part 1, 3, 4 OR 5
Standard Test Method For Thickness of Textile Materials
ISO 2589
Leather - Physical and mechanical tests - Determination of thickness
ASTM F36-99
Standard Test Method for Compressibility and Recovery of Gasket Materials
EN428
Resilient floor coverings - Determination of overall thickness
ASTMF2251
Standard Test Method for Thickness Measurement of Flexible Packaging Material
Features
Repeatability
Reproducibility
Measurement Range
Weight
Dimensions
Output
Power
Accessories
Options
*Dependant on operating conditions and instrument configuration |
