ECOCOOL 700 NBF (M) (Pail/Drum)

Product Description

Advantages:

• No foam. Higher pressures and flow rates in new machining equipment generate severe conditions for a metalworking fluid, with foam generation causing poor tool life, pump damage and safety concerns. Ecocool 700 NBF (M) is non-foaming, protecting your personnel and equipment.
• No tank side top-up. Many biocides are also toxic to humans and the environment. Ecocool 700 NBF (M) does not need any additional biocides as its biostatic nature restricts the development of both bacteria and fungus thus extending coolant life and minimizing problems of bad odours.
• Rapid demulsification. Ecocool 700 NBF (M) does not emulsify tramp oil allowing easy removal by oilskimming devices. Waste treatment is significantly easier.
• Ecocool 700 NBF (M) does not need any additional biocides as its biostatic nature restricts the development of both bacteria and fungus thus extending coolant life and minimizing problems of bad odours.
• Hard water stability. Water miscible fluids show instability under harsh conditions of hard water and high chlorides content, often forming solid soaps that can deposit on machine surfaces and causing corrosion. Shows exceptional stability in water hardness up to 400 ppm / 100 ppm chlorides.
• Ecocool 700 NBF (M) does not need any additional biocides as its biostatic nature restricts the development of both bacteria and fungus thus extending coolant life and minimizing problems of bad odours.
• Seal compatibility. Compatible with natural rubber, Nitrile and Neoprene Elastomers.
• Ecocool 700 NBF (M) does not need any additional biocides as its biostatic nature restricts the development of both bacteria and fungus thus extending coolant life and minimizing problems of bad odours.
• Superior corrosion protection. Exhaustive testing shows that Ecocool 700 NBF (M) offers the best corrosion protection compared with similar premium quality coolants in the market, even in poor quality water with chloride/hardness.
• Excellent tool life in arduous cutting operation.

Application:

• Recommended for central systems and individually filled machines.
• Suitable for 6000 and 7000 Series of Aluminium.
• Good performance working with Titanium material.
• Long Slump Life.
• One solution for all of your machining processes.
• Recommended concentrations:
• Normal machining 4 - 6%
• Difficult machining 8 -12%
• Grinding 3 - 5%