About TAKISAWA VTL-1100/1100M
| ITEMS | UNIT | VTL-1100 | VTL-1100M | ||||
| CAPACITY | Maximum Swing | mm | 1,330 | 1,330 | |||
| Swing Over Saddle | mm | 1,000 | 1,000 | ||||
| Standard Turning Diameter | mm | 425 | 425 | ||||
| Max Turning Diameter | mm | 460 | 460 | ||||
| Max Turning Length | mm | 1,000 | 1,000 | ||||
| TRAVEL | X-Axis Travel | mm | 650 | 650 | |||
| Z-Axis Travel | mm | 1,140 | 1,140 | ||||
| Milling Tool Shank Dia | m m | Max.34 | |||||
| SPINDLE | Spindle Speed | 850 | 850 | ||||
| Chuck Size | 32” | 32” | |||||
| Spindle Nose | Æ380 Flat | Æ380 Flat | |||||
| Through Hole Dia | mm | 110 | 110 | ||||
| Bearing Diameter | mm | 200 | 200 | ||||
| TURRET | Number Of Tool | T12 | T12 | ||||
| Turning Tool Shank | mm | 32 | 32 | ||||
| Boring Bar Shank Dia | mm | 80 | 80 | ||||
| FEEDRATE | X-Axis Rapid Traverse Rate | m / min | 20 | 20 | |||
| Z-Axis Rapid Traverse Rate | m / min | 15 | 15 | ||||
| MOTOR | Spindle Drive Motor | kw | 45/55 | 45/55 | |||
| Milling Motor | kW | 7.5/11 | |||||
| X Axis Drive Motor | kw | 4 | 4 | ||||
| Z Axis Drive Motor | kw | 6 | 6 | ||||
| SIZE | Height | mm | 4,310 | 4,310 | |||
| Width | mm | 3,255 | 3,255 | ||||
| Depth | mm | 3,605 | 3,605 | ||||
| Weight | kg | 25,000 | 25,500 | ||||
| •Specification is subject to change without further notice. | |||||||
