About GHN 35 Series
| MODEL | GHN35 SERIES |
| Swing over bed | 900mm |
| Swing over carriage | 750mm |
| Between center distance | 2000mm-12000mm (interval per 1000mm) |
| Width of bed | 900mm |
| Cross slide widt | 350mm |
| Spindle bore / spindle nose | 155mm/A2-11, 250mm/A2-15, 305mm/A2-20, 380mm/A2-20 |
| Spindle speed range (variable) | 6-600 rpm 4-400 rpm 4-400rpm 4-300rpm |
| Spindle speed step | 4 steps auto change speed |
| Main motor | 22 Kw / *30Kw |
| X axis ballscrew | 32mm P 5.0mm |
| Z axis ballscrew | 63mm P 10.0mm/ Between center distance above 7M using Gear& Rack |
| X axis travel | 305mm |
| Z axis travel | 2200mm-12200mm (interval per 1000mm) |
| X/Z motor | 3kw/4kw |
| Tailstock quill diameter | 165mm |
| Quill travel | 275mm |
| Quill taper | M.T. #6 |
| Tool post / Shank | 4T , 8T / 32mm |
| Controller | Fanuc 0i-TF , Siemens 828D , Fagor 8055i |
| Weight Net / Gross | 7000kgs / 8000kgs (GHN-3580)(every 1M interval longer add 1200kg) |
| Packing size | 4500mm*2200mm*2200mm(GHN-3580)(interval per 1000mm) |
| •Specification is subject to change without further notice. | |
