About KEYEAST SV Series
| ITEM | SV-20 | SV-22 | |||
| CAPACITY | Swing over bed (mm) | 510(20") | 560(22") | ||
| Swing over cross slide (mm) | 340(13.39") | 390(15.35") | |||
| Swing over gap (mm) | 710(27.95") | 760(29.92") | |||
| Length gap (mm) | 300(11.81") | ||||
| Distance between centers (mm) | 1000(39"),1500(59"), 2000(79"), 3000(118") | ||||
| Bed width | 350(13.78") (3V + 1 flat type) | ||||
| Cross slide width | 180(7.1") | ||||
| HEADSTOCK | Spindle bore / nose (mm) | 85 (3-1/3") (D1-8) / *105(4") (D1-11) | |||
| Spindle taper | MT#7 | ||||
| Spindle speed range (rpm) | 3-1/3" bore 20-2000 / *4" bore 20-1500 | ||||
| Spindle speed steps | 3 steps (variable speed) | ||||
| Main motor (hp) | 10 (inverter 10)/*15 (inverter 15) | ||||
| CARRIAGE & APRON | Cross slide travel mm | 260(10.24") | |||
| Compound slide travelmm | 125(4.92") | ||||
| TAILSTOCK | Diameter of quillmm | 65(2.56") | |||
| Travel of quill mm | 150(5.91") | ||||
| Center | M.T.#4 | ||||
| 4 way tool shank (mm) | 25(0.98") | ||||
| THREADING / FEEDING | Diameter of leadscrew (mm) | Φ35(1-3/4") x 4T.P.I. or P=6 | |||
| Metric threads (mm) | 0.2 – 14 | ||||
| Inch threads in | 2 – 72 thread / in | ||||
| Module threads | 0.3 - 3.5 | ||||
| DP threads | 16285 | ||||
| Longitudinal feeds (mm) | 0.04-1.0 | ||||
| WEIGHT | Net / Gross weight kgs(lb) | 1700(3740)/ | 2000(4400)/ | 2500(5500)/ | 3000(6600)/ |
| 2000(4400) | 2300(5060) | 2800(6160) | 3400(7480) | ||
| Floor size LxWxH (mm) | 2350(93")x | 2850(112")x | 3350(132")x | 4350(171")x | |
| 1100(43")x | 1100(43")x | 1100(43")x | 1100(43")x | ||
| 1500(59") | 1500(59") | 1500(59") | 1500(59") | ||
| Packing size LxWxH (mm) | 2500(98")x1400 | 3000(118")x | 3500(138")x | 4000(158")x | |
| (55")x2000(79") | 1400(55")x | 1400(55")x | 1400(55")x | ||
| 2000(79") | 2000(79") | 2000(79") | |||
| •Specification is subject to change without further notice. | |||||
