Carburettor Cleaner - Spanjaard Malaysia

Carburettor Cleaner
Aerosol for cleaning carburettors internally and externally. The powerful spray physically and chemically removes carbon, gum and varnish deposits from the carburettor.

Application
Spanjaard Carburettor Cleaner removes gums, varnish and carbon deposits from carburettors internally and externally without dismantling.

It cleans linkages, automatic chokes, PVC valves and jets, etc.

Regular use of Spanjaard Carburettor Cleaner improves fuel economy, performance and extends engine life.

Application Instruction

For Float Chamber and Jets:-

1. Engine should be at running temperature.

2. Clamp/disconnect fuel line near carburettor fuel inlet.

3. Run the engine until float chamber is empty (engine stalls).

4. Fill float chamber via carburettor fuel inlet or vent pipe at top of carburettor and allow to stand for 20 minutes.

5. Reconnect fuel supply and start engine (engine will run roughly until carburettor is clear).

6. Drive vehicle for 10km before making final carburettor adjustments - if necessary.

To clean venturis, chokes, jets and to decoke head, simply spray directly into carburettor throat with engine at fast idle for 2 minutes.

Typical Properties

Appearance	Clear, colourless liquid
Density (25°C), g/ml	0.89

Packing
350 ml aerosol can
500 ml aerosol can

Caution: Do not spray on painted surfaces.


Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei