MULTI VOLT(36V) Cordless Reciprocating Saw CR36DA

Electric (AC) Speed with Approx. 50% Less^*1 Vibration

The CR36DA reciprocating saw is designed with the twin counterweight system which ensures a significant vibration reduction, and provides the maximum cutting efficiency using orbital action.

Less User Fatigue due to Minimum Pushing Force Required to Operate

• Wood Cutting Speeds without Pushing Force (self-weight only)

  Note: Always firmly grip the handle and front grip while operating.

  2 x 10 SPF, No.132 blade, Max. Transmission Mode (CR36DA), Dial5 (CR13VBY)

  

• Wood Cutting Speeds with 49N (5kgf) Pushing Force

  2 x 10 SPF, No.132 blade, Max. Transmission Mode (CR36DA), Dial5 (CR13VBY)

  

• Steel Cutting Speeds with 49N (5kgf) Pushing Force

  SGP40A (48.6mm OD x 3.5mm WT), No.141(S) blade, Medium Transmission Mode (CR36DA), Dial4 (CR13VBY)

  

1. Vs. the CR18DBL cordless reciprocating saw. The value is shown for reference purposes and may vary according to the workpiece material and other operating conditions.
2. This value is shown for reference purposes and may vary according to the workpiece material and other operating conditions.

Runtime per Charge^*with BSL36A18 battery

• Approx. 60 Cuts in Wood
  2 x 10 SPF, Orbital Action, Max. Mode, 49N (5kgf) Pushing Force

  Approx. 50 Cuts in Steel
  SGP40A (48.6mm OD x 3.5mm WT), Straight Action, Medium Mode,
  49N (5kgf) Pushing Force

  • Values are shown for reference purposes and may vary according to the workpiece material and other operating conditions.

  

HiKOKI Twin Counterweight System

• The upper and lower counterweight gears spin in the opposite directions to balance out inertia force, resulting in significant vibration reduction.

  •  Vs. the CR18DBL cordless reciprocating saw. The value is shown for reference purposes and may vary according to the workpiece material and other operating conditions.

  

Orbital Action

• The change lever switches between the straight mode and the orbital mode, maximizing the wood-cutting efficiency.

  

Durable Cylindrical Housing

• The CR36DA is our first reciprocating saw with a cylindrical housing, providing a great improvement on durability.

Four-mode Speed Control for a Wide Range of Applications

Mode	Low	Medium	High	Max
Mode Indicator
SPM	0 - 1,700/min	0 - 2,000/min	0 - 2,500/min	0 - 3,000/min
Applications	Stainless Steel Plastic Fiber Board	Mild Steel Pipes Cast-iron Tubes L-shaped Angle Steel Aluminum Brass/Copper	ALC (Autoclaved Lightweight Concrete) Plasterboard Wood

The actual SPM values may vary according to the working conditions.

Tool-less Features

• Tool-less Blade Change

  Blade installation and removal can be done by a simple push of a lever.

  

• Tool-less Shoe Adjustment

  The shoe (base) lever allows the shoe to be adjusted.

  

Other Features

• • Large Pivoting Hook
  • LED Light