The Saluki SFS-2000 is the new standard 4 motors fusion splicer. Light Weight, Touch Screen, Friendly UI, Fast Fusion and Heating, makes it very popular and hot.
Key Features
| 7s fast splicing, 18s highly efficient heating
| 320 times image magnification
| 10000 groups of fusion records storage
| 5mm fusing for ultra-short cleave length
| 300 groups of splice modes, 100 groups of heating modes
| 220 counts of splicing and heating cycles with build-in battery
| Data center
| FTTx
| Metro
| Fiber Optic Components
| Optical Assembly
| R&D and Manufacturing
Detailed
Minimal Splice Loss
Consistent splicing performance
4 high precisely controlled motors
High Precision Ceramic V-groove
Typical splice loss:
0.03dB (SM), 0.02dB (MM), 0.04dB (DSF) and 0.04dB (NZDS)
Great Splice Efficiency
Minimum manual operation
Automatic ARC calibration
Auto-start splicing and tube heater operation
Faster 7s splicing, 18s heating
Easy maintenance
Compatible Fiber Holder
Ultra-high Capacity Battery
6800mAh Li-ion battery with 220 splices per charge
Providing all-day power for working
Specialized in field work
Fast 3.5h fully charged
Proven Reliability
Military quality, high level performance
Best reliability even under tough environment
Functions and Benefits
7s fast splicing, 18s highly efficient heating
320 times image magnification, 5mm fusing for ultra-short cleave length
300 groups of splice modes, 100 groups of heating modes
Ceramic presser foot, ceramic V-groove, all-in-one fixture
Dual-directional fusing, auto fusing, intelligent heat shrink
USB and SD card interface, auto update of U disk
Built-in modular lithium-ion battery, at least 220 counts of splicing and heating cycles
GUI (graphical user interface) and touch screen, convenient for operation
Dust-resistant, water-resistant, shock-resistant, greater environment adaptability
| Model | SFS-2000 | |
| Motor qty. | 4 | |
| Alignment method | Cladding alignment, manual alignment | |
| Applicable fibers | SMF (G.652), BIF (G.657), MMF (G.651), DSF (G.653), NZDSF (G.655) | |
| Typical splice loss | 0.03dB (SMF/BIF); 0.02dB (MMF);0.04dB (DSF); 0.04dB (NZDSF) | |
| Cleave length | 5 - 16mm (coated optical fiber diameter <=250μm) | |
| 10mm (coated optical fiber diameter: 0.25 - 3mm) | ||
| Optical fiber diameter | Cladding: 80 - 150μm, coating layer: 0.1 - 3mm | |
| Return loss | Better than 60dB | |
| Typical splicing time | 7s (Fast mode) | |
| Typical heating time | 18s | |
| Tension test | 1.96 - 2.25N | |
| Applicable protection sleeve | 60mm, 40mm and a series of protection sleeves | |
|
No. of splice/heating per battery full charge |
220 cycles |
|
| Magnification time | 320 times / 88 times | |
| Fusion records | 10000 groups | |
| Electrode service life | Typical: 4000 splices, can be replaced by customers | |
| Construction lighting | Built-in lights with high-brightness and wide lighting area | |
| Operating condition |
Altitude: 0 to 6000m above sea level; Temperature:-10 to 50°C; Humidity: 0 to 95%RH, non-dew; Wind:15m/sec*4 |
|
| Resistance features |
Shock: 60cm all surface drop Dust: Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X Rain: H=3mm/min for 10min, IPX2 |
|
| Port | USB / SD | |
|
Display |
High-performance 4.3 inch LCD |
|
Power Supply |
AC: 100-240V, 60Hz, 0-1.5A; DC: 10-15V |
| Max. power consumption | 55W |
| Battery | 11.1V, 6800mAh |
|
Battery service life |
Cycle charging: 300 - 500 counts, can be replaced by customers |
|
Size |
120W x 130H x 154D (mm) |
|
Weight |
1.65kg (excluding battery) / 1.95kg (including battery) |
|
Standard package |
Q'ty |
|
Fusion splicer |
1 PC |
|
Fiber cleaver |
1 PC |
|
AC adapter |
1 PC |
|
AC power cord |
1 PC |
|
Primary coat stripper |
1 PC |
|
Jacket remover |
1 PC |
|
Spare electrode |
1 PAIR |
|
Cooling tray |
1 PC |
|
Cleanup set |
1 SET |
|
Carrying case |
1 PC |
|
Certificate of quality |
1 PC |
|
User manual |
1 PC |
