HYPERTHERM Powermax65®: Lựa chọn hàng đầu tại Johor Bahru (JB), Malaysia, Selangor, Kuala Lumpur (KL), Singapore, Indonesia, Vietnam Amcoweld (M) Sdn Bhd

Mô tả

Overview

Handheld or mechanized plasma system for cutting and gouging metal

Key power supply advantages

Smart Sense™ technology automatically adjusts the gas pressure according to cutting mode and torch lead length for optimal performance.
Boost Conditioner™ circuit (on CSA models) improves performance on low‑line voltage, motor generators, and fluctuating input power.
FastConnect™ torches, CNC interface, and four work lead styles increase versatility for handheld and mechanized use.
Simplified control panel with LCD screen for easy operation.

Key torch advantages

15° and 75° Duramax™ series hand torches enable operators to easily select the right tool for the job. The handle is more heat resistant and performs at least five times longer in high impact tests than previous torches.
Standard and short-barreled Duramax series machine torches allow a wide variety of mechanized applications with X-Y tables, track systems, pipe and robotic cutting systems.
Conical Flow™ nozzle increases arc energy density for superior cut quality with little dross.
Patent pending shield reduces dross buildup and enables smoother drag cutting for a better cut.

Specifications

Input voltages	CSA 200 – 480 V / 1-PH / 50/60 Hz 200 – 600 V / 3-PH / 50/60 Hz CE 400 V / 3-PH / 50/60 Hz
Input current @ 9 kW	CSA 200/208/240/480 V / 1-PH 52/50/44/22 A 200/208/240/480/600 V / 3-PH 32/31/27/13/13 A CE 380/400 V / 3-PH 15.5/15 A
Output current	20 – 65 A
Duty cycle @ 40° C (104° F)	CSA 50% @ 65 A / 230 – 600 V / 1/3-PH 40% @ 65 A / 200 – 208 V / 1/3-PH 100% @ 46 A / 230 – 600 V / 1/3-PH CE 50% @ 65 A / 380/400 V / 3-PH 100% @ 46 A / 380/400 V / 3-PH
Open circuit voltage (OCV)	CSA 295 VDC CE 270 VDC
Dimensions with handles	19.7'' (500 mm) D; 9.2'' (234 mm) W; 17.9'' (455 mm) H
Weight with 25' (7.6 m) torch	CSA 64 lbs (29 kg) CE 57 lbs (26 kg)
Gas supply	Clean / dry / oil-free air or nitrogen
Recommended gas inlet flow rate / pressure	Cutting: 400 scfh / 6.7 scfm (189 l/min) @ 85 psi (5.6 bar) Gouging: 450 scfh / 7.5 scfm (212 l/min) @ 70 psi (4.8 bar)
Input power cable length	10' (3 m)
Power supply type	Inverter – IGBT

Engine-driven generator operation

Engine drive rating (kW)	System output (amps)	Performance(arc stretch)
15	65	Full
12	65	Limited
12	40	Full
8	40	Limited
8	30	Full

Cut chart

	Thickness	Thickness	Current	Maximum cut speed¹	Maximum cut speed¹
Material	(inches)	(mm)	(amps)	(ipm)	(mm/min)
Mild steel	10 GA	3	45	205	5000
Mild steel	1/4	6	65	145	3900
Mild steel	1/2	12	65	50	1430
Mild steel	3/4	19	65	24	610
Mild steel	1	25	65	13	350
Stainless steel	10 GA	3	45	168	4200
Stainless steel	1/4	6	65	120	3800
Stainless steel	1/2	12	65	40	1150
Stainless steel	3/4	19	65	19	490
Aluminum	1/4	6	65	190	5500
Aluminum	1/2	12	65	60	1660
Aluminum	3/4	19	65	30	770

¹ Maximum cut speeds are the results of Hypertherm’s laboratory testing. For optimum cut performance , actual cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details.

Operating Data

	Thickness	Minimum cut speed
	Handheld cut capacity	Handheld cut capacity
Recommended	3/4'' (19 mm)	20 ipm (500 mm/min)
Recommended	1'' (25 mm)	10 ipm (250 mm/min)
Severance	1-1/4'' (32 mm)	5 ipm (125 mm/min)
	Mechanized pierce capacity	Mechanized pierce capacity
	1/2'' (12 mm)	–

Metal removal rate	Groove profile
Gouge capacity	Gouge capacity
10.7 lbs. (4.8 kg) per hour	.14'' (3.5 mm) D x .26'' (6.6 mm) W

Ordering Information

Standard configurations

Below are some of the most common system configurations which include a power supply , torch and work
cable. Additional configurations are listed on our website.

Input voltages	Handheld systems Standard power supply H65 torch 7.6 m (25')	Handheld systems Standard power supply H65 torch 15.2 m (50')	Handheld systems Power supply with CPC port and selectable voltage ratio H65 torch 7.6 m (25')	Handheld systems Power supply with CPC port and selectable voltage ratio H65 torch 15.2 m (50')	Mechanized systems Power supply with CPC port and selectable voltage ratio M65 torch 7.6 m (25')	Mechanized systems Power supply with CPC port and selectable voltage ratio M65 torch 15 m (50')
200 – 600 V CSA²	083270	083271	083275	083276	083277	083278
400 V CE³	083279	083280	083284	083285	083286	083287

² For use in the Americas and Asia , except China.
³ For use in countries that require CE , CCC or GOST marks.

Custom configurations (select power supply, torch, work cable and other components)

Power supply options

	Standard power supply	Power supply with CPC port and selectable voltage ratio	Power supply with CPC port and selectable voltage ratio and serial interface port (RS-485)
200 – 600 V CSA	083234	083266	083267
400 V CE	083235	083268	083269

Component options

Cable length	Torches H65	Torches H65s	Torches M65	Torches M65m	Work cables Hand clamp	Work cables C-style clamp	Work cables Magnet	Work cables Ring terminal	Control cables Remote pendant	Control cables CNC spade plug⁴	Control cables CNC spade plug⁵
10' (3 m)	083246	083250	–	–	–	–	–	–	–	–	–
15' (4.5 m)	–	–	083254	083259	–	–	–	–	–	–	–
25' (7.6 m)	083247	083251	083255	083260	223125	223194	223197	223200	128650	228350	023206
35' (11 m)	–	–	083256	083261	–	–	–	–	–	–	–
50' (15 m)	083248	083252	083257	083262	223126	223195	223198	223201	128651	228351	023279
75' (23 m)	083249	083253	083258	083263	223127	223196	223199	223202	128652	–	–

⁴ For use with automation equipment that requires divided arc voltage.
⁵ For use when divided arc voltage is not required.

Torch Consumable Parts

Nozzles and electrodes are available in various quantities. Contact your distributor for more information.

Consumable type	Torch type	Amperage	Nozzle	Shield/Deflector	Retaining cap	Electrode	Swirl ring
Drag-cutting	Hand	45	220941	220818	220854	220842	220857
Drag-cutting	Hand	65	220941	220819	220854	220842	220857
Mechanized	Machine	45	220941	220817	220854 or 220953 (Ohmic)	220842	220857
Mechanized	Machine	65	220819	220817	220854 or 220953 (Ohmic)	220842	220857
Unshielded	Machine	45	220941	220955	220854	220842	220857
Unshielded	Machine	65	220819	220955	220854	220842	220857
FineCut®	Hand	45	220930	220931	220854 or 220953 (Ohmic)	220842	220947
FineCut®	Machine	5	220930	220931	220948 or 220953 (Ohmic)	220842	220857
Gouging	Hand	–	220797	220798	220854	220842	220857
Gouging	Machine	–	220797	220798	220854	220842	220857

Xem thêm chi tiết về Amcoweld (M) Sdn Bhd