Mô tả
Product description
This is a two component polyamine cured epoxy coating. It has good chemical resistance. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments.
Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.
Approvals and certificates Approved for PSPC for Crude Oil Tanks according to IMO Res. MSC 288(87) Tested in accordance with API recommended practice 5L2
Colours light grey, pink, greyish green, grey, red
Typical use Marine:
Designed as an internal tank coating for chemical tanks. This coating has good resistance to a wide range of products. Refer to Marine Product Resistance List on www.jotunprl.com. Can be used as a coating for grey water, drilling mud, brine and crude oil tanks.
Protective:
Recommended as an internal lining for offshore, onshore and buried tanks and pipes. Refer to Protective Product Resistance List.
Additional certificates and approvals may be available on request.
http://www.jotun.com/ww/en/b2b/technical-info/calculator/
|
Application method : |
Brush, roller, conventional air spray, high pressure airless spray |
|
Drying time : |
6 hours @ 23c |
|
Coverage : |
6-8 sq. metres per litre using brush or roller |
|
Coats: |
2 |
|
Thinner : |
No 23 |
|
Water resistance : |
Very good |
|
Flexibility : |
Good |
|
Gloss level : |
Flat |
|
Gloss retention : |
Limited |
|
Chemical Resistance : |
Excellent |
|
Abrasion Resistant |
Very Good |
|
Solvent Resistant |
Excellent |
|
Pot Life |
8 hours @23c |
Xem thêm chi tiết về Hst Solutions Sdn Bhd
