Mô tả
FUCHS RENOLIN UNISYN CLP 220 | 320 | 460 | 680 | 68 | 100
Product Description
These are fully-synthetic industrial gear oils with elevated aging resistance, excellent load-carrying capacity and wear protection. RENOLIN UNISYN CLP oils have good resistance to micropitting. Reliable lubrication of roller bearings is confirmed by the good results of the FE8 testing. The products are preferably used when increased requirements are set for high and low temperature usage limits. In gearboxes and circulating systems with sump temperatures up to 90ºC, longer oil-change intervals in comparison with previous mineral oils are achieved.
Miscibility with gearbox oils based on mineral oil is generally given, which means that simplified conversion is possible.
Application
The oils of the RENOLIN UNISYN CLP series are used for all applications in industry where a synthetic oil of the CLP type according to DIN 51517-3 is recommended by the manufacturer. Highly-stressed bearings, joints, pressure screws, spur gears and worm gears can be reliably, safely and economically supplied even at short-term peak temperatures up to 150ºC.
Advantages/Benefits
- Low foaming
- Good air release capacity
- Very good aging resistance
- Excellent corrosion protection
- Excellent viscosity-temperature behaviour
- High natural VI (viscosity index)
- Multigrade character
- Excellent wear protection, high EP performance
- Miscible with mineral oil- and ester-based gear oils
- Lifetime lubrication possible
- For high and low operating temperatures
Specifications
The products meet and in many cases exceed the requirements according to:
- DIN 51517-3: CLP
- ISO 6743-6 and ISO 12925-1: CKC / CKD / CKE
- AGMA 9005/E02: EP
- AIST 224
- David Brown S1 53.101
- FAG requirements: FAG-FE8-Test: stage 1-4 pass (test report is available for ISO VG 320)
- SKF requirements: pass (100ºC-test)
The RENOLIN UNISYN CLP series are approved for example by Siemens-Flender AG, Bocholt.
Typical Properties
| TYPICAL PROPERTIES |
UNIT |
FUCHS RENOLIN UNISYN CLP |
TEST METHOD |
| ISO VG |
- |
68 |
100 |
150 |
220 |
DIN 51 519 |
| Kinematic viscosity at 40°C |
mm2/s |
68 |
100 |
150 |
220 |
DIN EN ISO 3104 |
| at 100°C |
mm2/s |
10.7 |
14.5 |
19.6 |
26.7 |
| Viscosity index |
- |
147 |
150 |
150 |
155 |
DIN ISO 2909 |
| Density at 15°C |
kg/ m3 |
848 |
851 |
853 |
854 |
DIN 51 757 |
| Colour |
ASTM |
0.5 |
1.0 |
DIN ISO 2049 |
| Flashpoint, Cleveland oopen cup |
°C |
240 |
250 |
260 |
DIN ISO 2592 |
| Pourpoint |
°C |
-56 |
-53 |
-45 |
-42 |
DIN ISO 3016 |
| Neutralization number |
mgKOH/g |
0.6 |
DIN 51 558-1 |
| Scuffing and scoring test, FZG A/8.3/90 |
Failure load stage |
>12 |
DIN ISO 14635-1 |
| Scuffing and scoring test, FZG A/16.6/140 |
12 |
Micropitting test, FZG-GFT test GT-C/8.3/90 °C
Load stage test/ endurance test |
GF class |
GFT high |
FVA-information sheet no. 54/I-IV |
Micropitting test, FZG-GFT test GT-C/8.3/60 °C
Load stage test/ endurance test |
GFT high |
| FE-8 roller bearing test, 7.5/80/80 and 7.5/100/80 |
|
Pass (excellent) |
DIN 51 819-3 |
| TYPICAL PROPERTIES |
UNIT |
FUCHS RENOLIN UNISYN CLP |
TEST METHOD |
| ISO VG |
- |
320 |
460 |
680 |
1000 |
DIN 51 519 |
| Kinematic viscosity at 40°C |
mm2/s |
320 |
460 |
680 |
1000 |
DIN EN ISO 3104 |
| at 100°C |
mm2/s |
35.0 |
45.6 |
62.2 |
84.0 |
| Viscosity index |
- |
155 |
160 |
165 |
DIN ISO 2909 |
| Density at 15°C |
kg/ m3 |
860 |
861 |
862 |
864 |
DIN 51 757 |
| Colour |
ASTM |
1.0 |
DIN ISO 2049 |
| Flashpoint, Cleveland oopen cup |
°C |
260 |
300 |
DIN ISO 2592 |
| Pourpoint |
°C |
-42 |
-39 |
-33 |
-27 |
DIN ISO 3016 |
| Neutralization number |
mgKOH/g |
0.6 |
0.55 |
DIN 51 558 |
| Scuffing and scoring test, FZG A/8.3/90 |
Failure load stage |
>14 |
DIN ISO 14635-1 |
| Scuffing and scoring test, FZG A/16.6/140 |
>12 |
Micropitting test, FZG-GFT test GT-C/8.3/90 °C
Load stage test/ endurance test |
GF class |
GFT high |
FVA-information sheet no. 54/I-IV |
Micropitting test, FZG-GFT test GT-C/8.3/60 °C
Load stage test/ endurance test |
GFT high |
| FE-8 roller bearing test, 7.5/80/80 and 7.5/100/80 |
|
Pass (excellent) |
DIN 51 819-3 |
Contact our sales consultant in area:
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei
Malaysia
