Mô tả
1. General information
A security isolated 0/1-10V intelligent dimmer for LED lighting brightness adjusting,
and with manually knob adjusting and IR wireless remote adjusting optional. It suitable to control the
LED dimming driver and electronic rectifier which based on 0/1-10V dimming signal, to adjust the
brightness of the LED lamp or fluorescent lamp, etc. It has grey scale level 256, with scheduled shut
down (1-4 hours), brightness hot key and fixed gray output functions.
2. Specifications
1) Supply voltage: AC90-240V 50/60Hz
2) Output: 1 channel
3) Circuit design with security isolated, for protect load be safety.
4) Max load power: 800W
5) Max current: 10A
6) Effective Dimming current: ≤200mA
7) Dimming range: 1-10V, There are relay function, can be shut off , no frequency glisten
8) Control mode: Manually and IR remote
9) Scheduled shut down: 1-4 hours
10) Remote distance: 10M（In case no dry scratching）
11) Compatible above 90% led driver which based on standard 0/1-10V dimming signal
3. Installation and use instructions
1) The input voltage of this controller should to be AC90 -240V.
2) Never connect two wires directly in case of short circuit.
3) Knob operation: Rotary knob clockwise to increase brightness, knob counterclockwise rotation will
decrease the brightness.
4) Remote control operation: First use, please take out the lucid spacer which under remote down
side, the remote control facing the infrared receiver, ensure that there are no obstructions between
remote controller and receiver, when dimmer receives an effective signal from the infrared remote
control, the light on the upside flickers. Long press “+” and “-“ can be fast dimming
5) Power Application: Please confirm the dimming driver whether powered by dimmer or no, power
output Unequal according to different wiring type.
Xem thêm chi tiết về Hygrow Sdn Bhd
Malaysia
