Yamada DP-10BPT

Yamada DP-10BPT

Danh mục: Yamada AODD Diaphragm Pump Có sẵn
Có thể mua trên trang web chính thức
Để biết thêm thông tin, truy cập trang web chính thức của chúng tôi tại merns.com.my

Mô tả

Nominal diameter 3/8 ″ (10A)
Material connection Inlet Rc3 / 8
Discharge port
Air connection Supply port Rc1 / 4 (with air cock)
exhaust port Rc3 / 8 (with muffler)
Service air pressure 0.2 to 0.7 MPa
Discharge pressure 0.7MPa
Discharge rate / cycle 50mL
Slurry limit (maximum passing particle diameter) 1mm or less
Mass DP-10BA □: 3.5kg
DP-10BS □: 5.2kg
DP-10BP □: 3.0kg

   

DP-10BA □ series uses nylon (PA) as the material for the valve receiver. Pay attention to corrosion resistance. Not suitable for MEK etc.

  

Please download the parts exploded view and parts list from the data download page →Download data

Body (wetted part) material

Diaphragm material

C: Chloroprene
(CR)

N: Nitril Gum (NBR)

T: Fluorocarbon resin
(PTFE)

A: Al alloy (ADC12)

DP-10BAC
(851743)

DP-10BAN
(851742)

DP-10BAT
(851725)

S: Stainless (SCS14)

DP-10BSC
(851746)

DP-10BSN
(851747)

DP-10BST
(851741)

P: Polypropylene (PPG)

DP-10BPC
(851745)

DP-10BPN
(852280)

DP-10BPT
(851744)

Body (wetted part) material

Diaphragm material

H: Polyester type thermoplastic elastomer (TPEE)

S: Polyolefin-based thermoplastic elastomer
(TPO)

* H / T

A: Al alloy (ADC12)

DP-10BAH
(851750)
DP-10BAS
(852674)

DP-10BAH / T
(851872)

S: Stainless (SCS14)

DP-10BSH
(851751)

DP-10BSS
(852675)

DP-10BSH / T
(851873)

P: Polypropylene (PPG)

DP-10BPH
(851752)

DP-10BPS
(852676)

DP-10BPH / T
(851874)

* H / T is Diaphragm: Polyester thermoplastic elastomer (TPEE), Ball: Fluororesin (PTFE).
Note) Clicking the model / product number will display the parts list and parts exploded view.
Note) Download by right-clicking ''Save Target As'' ''''

 

Main material

 

Model

DP-10BA

DP-10BS

DP-10BP □

Ball valve

DP-10B □□ ・ ・ ・ Same as diaphragm material

Valve seat

A5056

SUS316

DP-10BPN ... NBR DP-10BPC ... CR
Other DP-BP □ ・ ・ ・ PPG

Valve holder

PA

PPG

Center disc

A5056

PPG (SUS304 *)

SUS304insert material ★ Initial self-lifting height is 1m for all models.

 

The maximum operating pressure of the body wetted part resin type (BP □) depends on the liquid temperature.
Be sure to check the “Liquid temperature and maximum working pressure diagram”.

 

Xem thêm chi tiết về Merns (M) Sdn Bhd
Merns (M) Sdn Bhd
Merns (M) Sdn Bhd Industrial Bearing Selangor, V Belt Supply Kuala Lumpur (KL), Grease Pump Supplier Malaysia ~ Merns (M) Sdn Bhd