Ash Digital Microscope (Quantum Series)

Program
There Are 6 Easy Steps To Allow You To Programe Your Parts/Setup Your Measurements.

Step One: Open new part
Step Two: Select Field of View which best suits the size of the part
Step Three: Set focus point
Step Four: Set the optimal lighting conditions for the part
Step Five: Define the edges of the part to ensure readiness for measurement
Step Six: Ready to perform measurements as outlined in the Measurement Suite section

Test
The Test Option Allows You To Perform Automatic Testing Of Your Production Parts.

Test your part against a master golden template to automatically identify defects.

Simply load the test part, run the test and the results are clearly displayed on the screen. Results can be captured and exported to an Excel document for documentation and traceability.

Horizontal Dimension

Allows the user to draw horizontal dimension measurements

Spline

Allows the user to measure samples with non-linear lengths

Vertical Dimension

Allows the user to draw vertical dimension measurements

Angle Without Origin

Allows the user to measure an angle without the need for a defined origin (useful for measuring parallelism of a part)

Dimension (Not Axis Tied)

Allows the user to measure a dimension without an axis

3 Point Arc With Radius Dimension

Allows users to define and measure the radius of an arc

Best Line Fit With Dimension

Aids users to define the length of a part with an uneven edge

Best Fit Circle With Dimension

Allows the user to define multiple points on a circle radius measurement. The greater the number of points defined the greater measurement accuracy

Angle

Allows the user to measure angles (angle with origin)

Best Fit Circle With Dimension Diameter

Allows the user to define multiple points on a circle diameter measurement. The greater the number of points defined the greater measurement accuracy.

Horizontal Dimension 2 Point

2 Point Horizontal Measurement. Does not require mouse left click hold and drag

Polygon Area

Allows users to define and measure an area of an irregular shape. Particularly useful for the polymer industry, such as measuring the area of a wire shielding section

Vertical Dimension 2 Point

2 Point Vertical Measurement. Does not require mouse left click hold and drag

Skew

Allows the user to set part alignment correction to the X axis on a part that has been placed in the FOV. Quick and accurate horizontal or vertical measurements with confidence.

Dimension 2 Point (Not Axis Tied)

Allows user to measure a dimension on any axis. Does not require mouse left click hold and drag

Datum

Datum can serve as a reference check to provide a precise depiction of a part, feature or an enhanced understanding of feature to feature relationships.

3 Point Perpendicular Dimension

Allows the user to measure the perpendicular distance between two planes

RTLDC™

Real-Time Lens Distortion Correction*

* Global Patent Applied For By ASH.

Unique Technology

Distortion is inherent in all lenses. Rather than correct this through optics, Ash have developed a digital solution. Quantum uses advanced algorithms to correct lens distortion on the live image. This results in consistent measurements across the entire field of view.

Quick Measurements & Data Sharing

Save and recall measurement and settings files for routine inspections.

Simultaneous automatic measurements to speed up inspection time.

PASS/FAIL tolerance judgement display for rapid identification of failures.

NFS connectivity for automatic transfer of results to the network.

Automatic Alignment

Automatic identification of part position & re-orientation: No need for a jig to position parts.

The position of a part is automatically identified and re-orientated to its programmed measurement position.