Comprehensive test analysis software package for recording and extensive evaluation of test results
Target-actual comparisons of force-displacement curves with freely definable good / bad ratings
Application as force sensor in test stands >> with rugged aluminium die cast housing, optimized fixing points and autoreverse display
Description
Digital Force Gauges FMI-S50 series are made for precise force measurements in materials testing and quality control. Combined with a laser distance sensor and manual or motor-driven test stands they can be upgraded to a comprehensive measurement system for all push and pull test requirements.
The sensor modules are integrated in robust die cast aluminium housings and directly connected to each other. Force is applied through a gauge rod with M6/M10 thread. The laser distance sensor allows a non-contact measurement on the test object or on a reference mark.
Measurement values are captured in real time and transferred to the PC. The software FMI_Analyze allows different ways of visualization, both automatic and manual starting and comparison with setpoint limits or graphic parameters (e.g. failure lines or measurement value windows).
Technical Specifications
Order No.
FMI-S50A5
FMI-S50B1
FMI-S50B5
FMI-S50C1
FMI-S50C2
FMI-S50C5
FMI-S50K1
FMI-S50K2
FMI-S50K5
Capacity F(nom)*
N
5
10
50
100
250
500
1000
2500
5000
Resolution**
N
0.001
0.002
0.01
0.02
0.05
0.1
0.2
0.5
1
Tolerance**
% F(nom)
0.15
Temperature coefficient*
%/K
0.02
Reproducibility*
%F
0.03
Repeatability*
%F
0.03
Hysteresis*
%F
0.075
Creeping (5min)*
%F
0.15
Measurement error**
% F(nom)
0.3
Measuring principle
Bidirectional force sensor with strain gauges and high-speed μ-processor
Nominal deflection*
mm
0.17
0.34
0.13
0.25
0.23
0.17
0.34
0.13
0.26
Measuring shaft
M6
M10
Max. operating force*
% F(nom)
120
Breaking force*
% F(nom)
500
200
Display
Type
5-digit LCD | 12mm | Autoreverse
Refresh time (ms)
10 ... 1000
Operation modes
Regular
N | kg | lb
Peak (real-time)
Display of peak value | Peak value of pull- or push force (drag indicator function)
Limits + Statistics
2 separately adjustable limits | Single value memory and continuous measured value memory
Power supply
Type
Solar cell | USB (max. 900 mA)
Connection
USB (socket)
Temperature (operation)*
°C
0 ... 40
Protection code (EN 60529)
Cable not plugged
IP40
IP65
Housing
Material
Aluminium die cast
Hardened steel
LxWxH (mm)
150 x 82 x 29
Weight (kg)
0.480
1.150
Mounting
2xM4, 2xM5, adjusting holes D5(H7)
*) according VDI/VDE/DKD 2638 at 0,2 ...1 x F(nom)
** ) according DIN 1319-1
Scope of Supply
Force gauge with force introduction parts (hook, flat head, groove head, pressure cone), USB cable, Quickstart manual, transport and protective case. Including FMI_Analyze software for real-time data acquisition Force/Distance/Time. Including calibration protocol according to VDI/VDE 2624 sheet 2.1 (DAkkS accredited calibration laboratory).
Muser Apac Sdn BhdTesting Instruments Supplier Kuala Lumpur (KL), Malaysia, Monitoring Mapping Systems Supply Selangor, Measuring Equipments Supplies ~ Muser Apac Sdn Bhd
Malaysia
