HARDEX STEELWELD EPOXY COMPOUND [5MINUTES]

PROFESSIONAL ADHESIVE & SILICONE PRODUCTS 
5MINUTES STEELWELD EPOXY COMPOUND
BONDS MATERIALS TOGETHER BY A CHEMICAL REACTION BETWEEN THE RESIN AND HARDENER. IT OFFERS GOOD
BONDING STRENGTH AND WILL HARDEN IN APPROXIMATELY 5 MINUTES AND ACHIEVE STRONG SETTING AFTER 8 HOURS. ATTAINED FULL STRENGTH AFTER 24 HOURS.IT IS VERSATILE,SHOCK RESISTANT AND TOLERANT TO MOST FUELS AND SOLVENTS.IDEAL APPLICATIONS INCLUDE REPAIRING A WIDE RANGE OF MATERIALS INCLUDING METAL,WOOD,CONCRETE,CERAMIC AND ETC. IT CAN CURE TOUGH,STEEL-FILLED MATERIALS THAT CAN BE DRILLED,TAPPED AND SANDED.
- HIGH STRENGTH COMPRESSIVE STRENGTH 6300 PSI
- CURE IN 5 MINUTES
- COLOR GREY
- STEEL FILLED
- CAN BE DRILLED
- CHEMICAL RESISTANT
- HIGH BONDING
- STRENGTH
- USED FOR INDUSTRIAL
- REPAIR
DIRECTIONS:
1. SURFACES MUST BE CLEAN,DRY AND THOROUGHLY ROUGHEN.
2. REMOVE CAPS,PIERCE END OF TUBES.SQUEEZE EQUAL AMOUNT OF RESIN AND HARDENER FROM EACH
    TUBE. RATIO 1:1
3. MIX THOROUGHLY UNTIL CONSISTENT DARK GREY COLOUR MIXTURE.
4. APPLY TO THE SURFACES TO BE REPAIRED OR JOINED TOGETHER.
 
NOTE: NOT RECOMMENDED TO USE ABOVE 121'C.IF TEMPERATURE IS BELOW 15'C,THE HARDENING TIME IS
            CONSIDERABLY LONGER.