OSRAM OT 200/220-240/1050 P7

• 200/220-240/1050 P7

• High surge protection : up to 10 kV
• High efficiency (up to 94%)
• Fix current for optimized fixture design
• Over temperature protectiom
• IP rating : IP67 (Independent installation)
• Long lifetime

• Street and urban lighting
• Industry lighting
• Suitable for luminaires of protection class I

• Nominal voltage : 220…240 V
• Input voltage AC : 198…264 V
• Mains frequency : 50…60 Hz
• Power factor λ : > 0.95 
• Total harmonic distortion : < 8 % 
• Device power loss : 13 W 
• Inrush current : 65 A 
• Max. ECG no. on circuit breaker 10 A (B) : 2
• Max. ECG no. on circuit breaker 10 A (C) : -
• Max. ECG no. on circuit breaker 16 A (B) : 4
• Max. ECG no. on circuit breaker 16 A (C) : -
• Max. ECG no. on circuit breaker 25 A (B) : 7
• Surge capability (L/N-Ground) : 10 kV
• Surge capability (L-N) : 6 kV
• Nominal output power : 140…200 W
• Maximum output power : 200 W
• Efficiency in full-load : 94 % 
• Nominal output voltage : 133…190 V
• U-OUT (working voltage) : 210 V
• Nominal output current : 1050 mA
• Output current tolerance : ±5 %
• Minimum output current : 1050 mA
• Galvanic isolation : basic
• Length : 188.0 mm
• Width : 60.0 mm
• Height : 33.0 mm
• Mounting hole spacing, length : 153 mm
• Product weight : 710.00 g
• Cable cross-section, input side : 1.0 mm²
• Cable cross-section, output side : 1.0 mm²
• Wire preparation length, input side : 10 mm

• Ambient temperature range : -40…+55 °C
• Temperature range at storage : -40…+85 °C
• Maximum temperature at tc test point : 85 °C
• Max.housing temperature in case of fault : 110 °C

• ECG lifetime : 50000 h

• Dimmable : No
• Suitable for fixtures with prot. class : I
• Intended for no-load operation : No
• Number of channels : 1

• Type of protection : IP67
• Standards : Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 62384/Acc. to EN 60598-1 (ED.8)
• Approval marks – approval : CE / CCC / TISI / RCM / ENEC 25