Cedar Torque Tester (WDISR-IPS Series)

• A color display that can display various information.
• Data output is standard equipment for both USB and RS232C.
• Numerical values such as pass / fail conditions can be set up to 10 channels.
• The pass / fail judgment is displayed in color for easy understanding.
• Built-in battery drive.
• Various commands can be input from PLC or PC.
• The WDISR-IPS series includes WDISR-IPS05C, WDISR-IPS5C, and WDISR-IPS20CL.

A type that can be disengaged from high speed with a clutch at once

Use OW joint

Screw tightening robot etc. A type that slowly re-tightens with current control

Use screw cube

Color Display that can Display Various Information

Data output is Standard Equipment for both USB and RS232C

Works with PC and PLC

Command list

Clear signal: Clears the display and outputs the held numerical value as data and saves it in memory.
Measurement mode: Change the measurement mode.
Measurement channel: Change individual channels for which conditions such as pass / fail judgment are set.
Peak hold upper limit: Change the pass / fail judgment upper limit of the current channel.
Peak hold lower limit: Change the pass / fail judgment lower limit of the current channel.
Peak down lower limit: Change the peak down judgment start lower limit of the current channel.
Real-time output lower limit: Changed the output lower limit of real-time output.
Auto clear time: Changed the time to automatically clear after the measurement is completed.
Buzzer notification: Changed the buzzer notification method.