HannYa Stainless Steel Thermal Shock Test Chamber Thermal Cycling Test Equipment
Characteristics
Over-temperature protection
Over-current protection
Over-current circuit breaker
Earth - leakage protection
1 years warranty
Accessories complete
Advantages
Safety to avoid electric leakage due to improper operation
Maintenance is more convenient
Comply with international standars
| Inner size(mm) | 400×350×300 | |||
| Temperature range | High temperature chamber:RT~+150°C Low temperature:RT~-60°C | |||
| Temperature deviation | Less than ±2°C | |||
| Temperature conversion time | Less than 10S | |||
| Temperature recovery time | Less than 5min | |||
| Material | External material: SUS#304 Stainless steel plate Internal material: SUS#304 Stainless steel plate |
|||
| Coolting system | Water-cooled or air-cooled, Tecumseh compressor in France, Environment friendly refrigerant |
|||
| Controllor | Programmable temperature controllor imported from Japan | |||
| Temperature sensor | PT 100 *3 | |||
| Setting range | Temperature: -100.00+200.00°C / Time: OH1M ~ 9999H 59M / Cycle: 10000 cycle |
|||
| Resolution | Temperature: 0.01°C / Tim: 1min | |||
| Output mode | PID + PWM + SSR control method | |||
| Simulated load IC (kg) | 3.5kg | |||
| Standard accessories | Cable hole, lighting equipment | |||
| Cooling system | Water-cooled/air-filled type | |||
| Power | AC380V/50HZ Three-phase four-wire ac power | |||
| Additional features | The outlet and return it checks for taste known control /CM BUS (RS-485) remote monitoring management system /Ln2 liquid nitrogen rapid cooling control device |
|||
| Remarks | It can be customiazed according to customer demands. Technology index refer to product description.Delivery time within 45days. |
|||
