Renolin CLP 680

FUCHS RENOLIN CLP 680

Product Description
Fuchs Renolin CLP 680 is industrial gear oil of the latest generation, having outstanding extreme pressure characteristics (EP/AW properties) and an extremely high load carrying capacity. They are industrial gear oils with excellent demulsifying properties which can be used in all types of enclosed gear drives with circulation or splash lubrication systems.

The Renolin CLP 680 offer extraordinary wear protection. They surpass the requirements in the standard FZG A/8,3/90 scuffing test as well as the more severe FZG test A/16,6/140 (double velocity - 16.6 m/s - and increased starting oil sump temperature - 140ºC).

The Renolin CLP 680 offer an extremely high micropitting protection (load stage “high” in the load stage test as well as the endurance test). They offer excellent wear protection for roller bearings. The wear rates in the FAG FE8 test are extremely low under these extreme test conditions (7.5 rpm, 80ºC, 80 h, 80 kN). Latest additive technology guarantees excellent wear protection and excellent corrosion protection (steel and copper-containing materials) The Renolin CLP 680 have good elastomer compatibility, stressed static and dynamic elastomers are lubricated and protected from wear. The lifetime of the components is increased. RENOLIN CLP oils can improve equipment reliability and increase productivity.

 

- Excellent corrosion protection

- Low foaming, excellent air release

- Excellent demulsifying properties (water and watercontaining fluids are separated fast)

- High oxidation resistance

- Extremely high load-carrying capacity, extreme pressure-, anti-wear performance

- Excellent bearing wear protection (under mixed friction conditions) – FE8

- Excellent protection from scuffing, excellent wear protection - FZG

- Excellent micropitting resistance in the load stage and endurance test

- High Brugger wear protection

- Excellent elastomer compatibility (static and dynamic)

- Good compatibility with paint materials

 

Typical Properties

TYPICAL PROPERTIES	UNIT	FUCHS RENOLIN CLP	TEST METHOD
ISO VG	-	680	DIN 51 519
AGMA grade	-	8EP
Kinematic viscosity at 40°C	mm2/s	680	DIN EN ISO 3104
at 100°C	mm2/s	36.8
Viscosity index	-	88	DIN ISO 2909
Density at 15°C	kg/ m3	918	DIN 51 757
Colour	ASTM	8.0	DIN ISO 2049
Flashpoint	°C	270	DIN ISO 2592
Pourpoint	°C	-10	DIN ISO 3016
Neutralization number	mgKOH/g	0.6	DIN 51 558-1
Demulsibility at 54°C	min.	-	DIN ISO 6614
at 82°C		30
Copper corrosion 3h, 100°C (100 A3)	Degree of corrosion	1	DIN EN ISO 2160
Corrosion protection – steel Procedure A: dist. water	Degree of corrosion	0	DIN ISO 7120
Procedure B: sea water
Foaming Seq. I Seq. II Seq. III	ml	0/0	ASTM D 892
FZG A/8,3/90 gear test rig Start temperature: 90°C	Failure load stage	>14	DIN ISO 14635-1
FZG A/16,6/140 gear test rig Start temperature: 140°C		>12
FZG-GFT* test GT-C/8,3/90 Load stage test	GF class	GFT high	FVA-information sheet no. 54/I-IV
FZG-GFT* test GT-C/8,3/90 Endurance test		GFT high
FE8 wear test, D7,5/80-80 Roller wear	mg	<5	DIN 51 819-3
Testing in mixed friction area according to Brugger	N/mm2	≥50	DIN 51 347-2
Timken OK load	lbs	95	ASTM D 2782
4-Ball EP test	N	≥2400	DIN 51 350-2
Weld load	kg	≥250	ASTM D 2783-88
Elastomer compatibility – dynamic and static 72NBR902 (1000 h, 80°C – dynamic) 75FPM585 (1000 h, 90°C – dynamic) 75FKM17055 (1000 h, 90°C – dynamic)   SRE-NBR 28/SX according to DIN ISO 13226 (100°C, 7 d – static)		Pass	Fuchs In-house Test according to DIN ISO 1817 and to Flender
		Pass	DIN ISO 1817

Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei.