Model No. (Order Code)
| BT3562 |
Battery HiTester, Discontinued |
| BT3562-01 |
Battery HiTester, Built in GP-IB and analog output |
Note: The comparison threshold values depend on the battery manufacturer, type, and capacity, and these must be established by the user.
Note: Measurement leads are not included. Purchase the appropriate lead option for your application separately. The male (system side) of the EXT I/O connector is also available. Please contact your authorized Hioki distributor or reseller.
FEATURES
Ideal for a diverse array of battery products and testing needs
• General battery pack testing
• Battery module testing
• Large (low-resistance) cell testing
• High-speed mass production testing of coin batteries
• Fuel cell stack measurements
• Battery research and development measurement applications
High-speed interfaces fully prepared for automatic production lines
The fastest 10 ms measurement data can be transferred via the standard RS-232C interface at up to 38,400 bps. (BT3562-01 includes a GP-IB interface.)
Use the interfaces to control triggering, measurement configuration loading, and zero adjustment from an external source. Output signals provide comparator results, end-of-measurement events, and measurement error information.
The De Facto Standard of Battery Testers
The HIOKI BT356x series
These highly advanced battery testers are best suited for shipping and acceptance inspections of cells and battery packs. They simultaneously measure internal resistance and the battery’s open-circuit voltage (OCV).
Since the AC-IR measurement method is used, the measurement time is shortened. In addition, highly repeatable results are attained with this method. These testers have a highly accurate 3 mΩ range, allowing for a resistance measurement of battery tab welding and bus bars. All of this combines for the best choice in battery testers.
High input voltage applications The input high voltage (1,000 V) model, BT3564, can measure the total resistance of the battery whole pack at once.
SPECIFICATIONS
Basic specifications
Accuracy guaranteed: 1 year
| Max. applied measurement voltage |
± 60 V DC rated input voltage
± 70 V DC Max. rated voltage to earth |
| Resistance measurement ranges |
3 mΩ (Max. display 3.1000 mΩ, resolution 0.1 μΩ) to 3000 Ω (Max. display 3100.0 Ω, resolution 100 mΩ), 7 ranges
Accuracy: 30 mΩ to 3000 Ω ranges, ± 0.5% rdg. ± 5 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM)
3 mΩ range, ± 0.5% rdg. ± 10 dgt. (Add ± 30 dgt. for EX.FAST, or ± 10 dgt. for FAST, or ± 5 dgt. for MEDIUM)
Testing source frequency: 1 kHz ± 0.2 Hz, testing current: 100 mA (3 mΩ range) to 10 μA (3000 Ω range)
Open-circuit Voltage: 25 V peak (3/30 mΩ ranges), 7 V peak (300 mΩ range), 4 V peak (3 Ω to 3000 Ω ranges) |
| Voltage measurement ranges |
6 VDC (resolution 10 μV) to 60 VDC (resolution 100 μV), 2 ranges |
| |
Accuracy: ± 0.01% rdg. ± 3 dgt. (Add ± 3 dgt. for EX.FAST, or ± 2 dgt. for FAST and MEDIUM) |
| Display |
31000 full digits (resistance), 600000 full digits (voltage), LED |
| Sampling rate |
Four steps, 4 ms (Extra-FAST), 12 ms (FAST), 35 ms (Medium), 150 ms (Slow)
(Typ., sampling time depends on supply frequency settings and function.) |
| Measurement time |
Response time + sampling rate, approx. 10 ms for measurements
(Response time depends on reference values and the measurement object.) |
| Comparator functions |
Judgment result: Hi/IN/Lo (resistance and voltage judged independently)
Setting: Upper and lower limit, Deviation (%) from reference value
Logical ANDed result: PASS/FAIL, calculates the logical AND of resistance and voltage judgment results.
Result display, beeper, or external I/O output, Open-collector (35 V, 50 mA DC max.) |
| Analog output |
Measured resistance (displayed value, from 0 to 3.1 V DC, -01 suffix models only) |
| Interfaces |
External I/O, RS-232C, Printer (RS-232C), GP-IB (-01 suffix models only) |
| Power supply |
100 to 240 VAC, 50/60 Hz, 30 VA max. |
| Dimensions and mass |
215 mm (8.46 in) W × 80 mm (3.15 in) H × 295 mm (11.61 in) D, 2.4 kg (84.7 oz) |
| Included accessories |
Instruction manual ×1, Power cord ×1 |
BT3562-01
