Product description:
Product Name:Strong Adhesive Seamless Wall Hook No Punching Nail Screws Paste Sticks MM Size
Color: transparent
Gross weight: 8 grams
Sticker size: 5 cm * 8 cm.
Screw length: 8-16 mm.
Screw size: 4 mm diameter, 5 different screw lengths to choose from (8 mm, 10 mm, 12 mm, 14 mm, 16 mm)
Choose the right screw length (recommended):
8 mm: bracket thickness 1-5 mm
10 mm: suitable for brackets with a thickness of 1-7 mm
12 mm: suitable for brackets with a thickness of 1-9 mm
14 mm: suitable for brackets with a thickness of 1-11 mm
16 mm: suitable for brackets with a thickness of 1-13 mm
*Material: Stainless Steel, PVC;
*Heavy Duty: Solid, reliable, waterproof and oil proof, heavy duty can burden high gravity, great bearing up to 8 kg / 17 lbs.But we'd like to suggest no more than 13 lb/6 kg for holding a long time.
*Easy to Use: Just peel off the cover starting from the bulge, then put the hook on smooth surface. Easy to clean and reposition without surface damage.
*Suitable for All Types of Wall: Works on a variety of surfaces, like wood, tile, ceramic, metal surface and more. Please pay attention that there are limits on painted walls, it may damage the wall if the paint wall adhesion is poor.
*Press and hold the prominent position of the basic to remove the hook slowly. No Traces will left. If you can not remove it, you can use the hair dryer to continuously heat up until it is easily removed
*Removed after the second use:
*Continue to heat with a hair dryer until the strong adhesive softens and stick to the location you want to stick
*1. Normally on the smooth tile surface, this hook can hold up to 17 lb/8 kg.
*2. Please clean the adhesive surface with water if it has dust covered before reposition the hook.
*3.Please do not hang fragile goods or dangerous goods!
*4.Test the hook by your hand. It will be Stronger to hold heavy things in hours.
*How to use:
*1. Clean the surface from oil/dust/water, set the item to the wall to determine the location
*2. Use pen to mark the position of hole.
*3. Uncover the transparent protective film on the back of the patch
*4. Paste the center of the screw in the center of the mark and then press down Right Wrong
*5. From the inside to the outside of the hook compaction, remove the air
*6. Paste the hook one by one
*7. Put on the screws one by one
*8. Check that the installation is secure
