Mô tả
SIKA ANCHORFIX® S
Universal anchoring adhesive
Styrenated polyester based 2-component anchoring adhesive.
- Fast curing
- Non-sag, even overhead
- ETA for anchoring in uncracked concrete
USAGE:
As a fast curing anchoring adhesive for all grades of:
- Rebars / reinforcing steel
- Threaded rods
- Bolts and special fastening systems
In the following substrates:
- Concrete
- Hollow and solid masonry
- Hard natural stone
- Solid rock
These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika Sika AnchorFix® S adhesive must be tested by first applying the Product only to a sample area. Check in particular bond strength, surface staining and discolouration.
ADVANTAGES:
- Fast curing
- Non-sag, even overhead
- ETA for anchoring in uncracked concrete
- Low wastage
COLOUR
| Component A |
White |
| Component B |
Black |
| Component A+B mixed |
Light Grey |
PACKAGING
300 ml standard cartridge
12 cartridges per box
pallet: 75 boxes
APPLICATION
SUBSTRATE QUALITY
- Mortar and concrete must be at the required strength. No need to be 28 days old.
- Substrate strength (concrete, masonry, natural stone) must be verified.
- Pull-out tests must be carried out if the substrate strength is unknown.
- The anchor hole must always be clean, dry, free from oil and grease etc.
- Loose particles must be removed from the holes.
- Threaded rods and rebars have to be cleaned thoroughly from any oil, grease or any other substances and particles such as dirt etc.
Xem thêm chi tiết về PAINT MASTER SDN BHD
