Model : LS-401-C2
.png)
Easy Integration and Compatibility:
User-Friendly Operation:
Advanced Sensing Modes:
Enhanced Functionality:
Convenient Monitoring and Diagnostics:
| Type | Cable type |
| NPN output | LS-401-C2 |
| CE marking directive compliance | EMC Directive, RoHS Directive |
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Power consumption | Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage) |
| ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage) | |
| Outputs | <NPN output type> |
| (Output 1, Output 2) | NPN open-collector transistor |
| 0Maximum sink current: 100 mA (LS-403 is 50 mA) (Note 2) | |
| 0Applied voltage: 30 V DC or less (between output and 0 V) | |
| 0Residual voltage: 1.5 V or less [at 100 mA (LS-403 is 50 mA) (Note 2) sink current] | |
| <PNP output type> | |
| PNP open-collector transistor | |
| 0Maximum source current: 100 mA (Note 2) | |
| 0Applied voltage: 30 V DC or less (between output and +V) | |
| 0Residual voltage: 1.5 V or less [at 100 mA (Note 2) source current] | |
| Output operation | Selectable either Light-ON or Dark-ON, with jog switch |
| Short-circuit protection | Incorporated |
| Response time | 80 μs or less (H-SP), 150 μs or less (FAST), 500 μs or less (STD), 4 ms or less (U-LG) selectable with jog switch |
| External input (Laser emission halt Full-auto teaching / Limit teaching) |
NPN non-contact input 0Signal condition |
| High: +5 V to +V DC or open Low: 0 to +2 V DC (source current 0.5 mA or less) 0Input impedance: 10 kΩ approx.<PNP output type> |
|
| Operation indicator | Orange LED (lights up when output 1 and output 2 are ON) |
| Laser emission indicator | Green LED (lights up during laser emission) |
| Select indicator | Yellow LED (lights up when either output 1 or output 2 is selected) |
| MODE indicator | RUN: Green LED, TEACH 0 L/D 0 TIMER 0 CUST 0 PRO: Yellow LED |
| Digital display | 4 digit (green) + 4 digit (red) LED display |
| Sensitivity setting | Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Window comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment | |
| Hysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment | |
| Differential mode: 5-level settings (LS-403 has 8-level settings) | |
| Fine sensitivity adjustment function | Incorporated |
| Timer function | Incorporated with variable ON-delay / OFF-delay / One shot timer, switchable either effective or ineffective. [Timer period: 1 to 9,999 ms approx.(LS-403 is 0.5 to 9,999 ms approx.)] |
| Automatic interference prevention function | Incorporated |
| [Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode) (LS-403 is up to two sets when in H-SP mode)] | |
| Ambient temperature | -10 to +55 +14 to +131 ! (If 4 to 7 units are mounted close together: -10 to +50 +14 to +122 ! , if 8 to 16 units are mounted close together: -10 to +45 +14 to +113 ! ) (No dew condensation or icing allowed), Storage: -20 to +70 4 to +158 ! |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
| Shock resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Material | Enclosure: Heat-resistant ABS, Transparent cover: Polycarbonate, |
| Push button switch: Acrylic, Jog switch: ABS | |
| Cable | 0.15 mm2 5-core cabtyre cable, 2 m 6.562 ft long |
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| Weight | Net weight: 65 g approx., |
| Gross weight: 75 g approx. |
