Axiabore Fine Boring Heads

The Axiabore^® range consists of 5 fine boring heads using axial tools:

• Nanobore^®, a precision fine boring head for extremely small diameters, 0,3 - 8 mm (0.012-0.315 inches) 
• Axiabore^®, a precision fine boring head for the 2 - 20 mm diameter range (0.078 to 0.78 inches)
• Axiabore^® Plus, a precision head covering a larger diameter range, 6 - 108 mm (0.236 to 4.25 inches), and designed for high precision boring, OD-overturning and grooving
• Axialibrabore™, a balanceable head for high speed machining, 2 - 20 mm diameter (0.078 to 0.78 inches)
• Axialibrabore™ Plus, a balanced head for high speed machining for larger diameters, 6 - 33 mm (0.236 to 1.3 inches)

We can offer you...

Precision

• Micrometric adjusting (2,5µm on the diameter; 0.0001 inches): hole diameter precision up to IT5 achievable.
• Rigid tools for full control of the hole geometry and surface finish (Ra 0.6 achievable).

Productivity

• ‘Cylinder & flange’ tool fixing design for a superior tool rigidity: higher speeds (e.g. up to Vc 500 m/min=4640 sf/min in steel), higher productivity, higher precision and better surface finish. 
• Fine balanced heads allow higher speeds, improve the hole geometry and reduce the machine spindle stress.

Cost effective 

• Boring capacities from 0,3 to 108 mm (0.012 to 4.25 inches), with 3 head sizes only. 
• Modular boring bars composed of a shank and interchangeable insert holder, for wide capacities. 
• Heads are made from oxidation resistant steel, are lubricated and sealed.

Multi-operations 

• Boring, grooving and OD-overturning with the multi-purpose adapter (MPA) used with the Axiabore Plus head.

User friendly 

• ‘LibraOne’ system with one balancing ring only, with direct ring reading, no chart needed. 
• IBL ‘indirect barrel locking’ system: the set diameter is not influenced by the locking screw. 
• Suitable for interrupted cut. 
• Through coolant head and through or along the tools and the multi-purpose adapter. 
• Ten kits to cover wide boring capacities.