HIOKI 9660 Clamp On Sensor
For measuring load current, voltage output sensor 100 A AC
OVERVIEW
Hioki current sensors are best-in-class devices for use with power meters and PQAs. The 9660 is a 100A AC clamp sensor with voltage output for measuring load current.
CAT III 300V
Key Features
- For inverter devices or commercial power lines
- Fits in narrow spaces due to compact design
Model No. (Order Code)
| 9660 |
Clamp On Sensor. For the PW3360/65, 3169, PW3198 and similar products |
Note: Supports power quality analyzers, power meters and other data acquisition equipment with voltage input
SPECIFICATIONS
Basic specifications
Accuracy guaranteed: 1 year
| Rated measurement current |
100 A AC |
| Max. measurement current |
Continuous 130 A (45 to 66 Hz) |
| Output rate |
1 mV AC/ A |
| Amplitude accuracy (45 to 66 Hz) |
±0.3 % rdg. ±0.02 % f.s. |
| Phase accuracy |
±1° (45 Hz to 5 kHz) |
| Amplitude frequency characteristics |
Within ±1% at 40 Hz - 5 kHz (deviation from amplitude accuracy) |
| Max. rated voltage to earth |
300 V AC rms or less |
| Measurable conductor diameter |
φ 15 mm (0.59 in) or less |
| Operating temperature and humidity |
0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation) |
| Dustproofness and waterproofness |
N/A |
| Dimensions and mass |
46 mm (1.81 in)W × 135 mm (5.31 in)H × 21 mm (0.83 in)D, 230 g (8.1 oz)
Cord length 3 m (9.84 ft), Output terminal: BNC |
