Spectral response range: 315nm-400nm, λp = 365nm
Record real-time power, power maximum, energy value and curing time together
Provide PC software
LS130 is a UV energy meter that measures both UV energy and UV intensity. It is suitable for testing UV intensity and energy in light sources such as high-pressure mercury lamps and halogen lamps. It is recommended for use in UV curing machine, printing machine, exposure machine, UV dryer and other equipment.
A Chinese UV energy meter which ensure to pass the detection by the Chinese National Metrology Institute
An UV light integrator for simultaneous measurement of UV energy and UV intensity
Simultaneously display real-time power value, maximum power value, energy value and measurement time
An UV energy meter that can read data and graphs through special computer software and print test reports
| Parameter | LS130 UV Energy Meter |
|---|---|
| Spectral range | 315nm-400nm, λp = 365nm |
| Irradiance measuring range | 0-2000mW/cm² |
| Irradiance resolution | 0.1mW/cm² |
| Energy measuring range | 0-999999mJ/cm² |
| Measuring accuracy (H is the standard value) |
H<5mW/cm²：±0.5mW/cm² H>=5mW/cm²：±10%H, ±5% (typical) |
| Sampling speed | 2000 times/second |
| Irradiance data storage interval | 32 times/second |
| Recording period | 32 minutes |
| Power supply | 4 AAA alkaline dry batteries |
| Display | 240*160 Dot matrix LCD |
| Test Hole Diameter | Φ10mm |
| Dimension | 160mm× 75mm×13mm(L*W*H) |
| Weight | 303 g |
LS130 UV energy meter can measure UV power and energy at the same time. The meter can display real-time power value, maximum power value, energy value and measurement time. The measurement time can accurately show the UV curing time
There are two measurement modes. One is Manual mode which needs to start up or end of measurement manually. Another is Automatic modes that can automatic switch-on or end of measurement when the energy intensity emitted by the light source is above or below the trigger threshold that can be set
Adopting metal shell and high temperature resistant design, the UV light integrator can run in the environment of 100 degrees Celsius for a long time. In addition, the instrument also provides a high temperature cover for users to choose. (the high temperature cover is not included as standard)
LS130 UV energy meter offers complimentary computer software that can be is connected through a USB interface. You can read detailed test data and print a test report when using software
The large liquid crystal screen directly displays the power curve. The power curve can be used to analyze the intensity distribution of the light source. The front detector design facilitates the reading of data
The detector is located on the same side of the screen and we can read data during the test
JJG 879-2015 Verification Regulation of Ultraviolet Radiometer
