详情
Product outline
UTM series have been upgraded to UTM II to better meet the various needs of customers!
Great improvements on the bandwidth (1kHz), sampling rate (6kHz), overload rating (500%), and so on have been made, while all great features of the existing model are succeeded.
We will continue to devote ourselves to research and development of unique products. Please feel free to contact us anytime for further information!
Improved specification & performance
１．Analogue bandwidth 1kHz with high speed sampling rate of 6kHz.
２．Safe overload :500%
３．UTMⅡ series are available in wide range of the rated capacity from 0.05Nm to 10000Nm.
４．4 pulse outout per rotation ( used to be 1 ppr. )
５．Noise immunity has been greatly improved.
High accuracy, stability, slip-ring-less, and compact
-High accuracy and stability
1/10000 resolution with outstanding zero stability.
Even small torque variations can be detected by UTMⅡ.
-Maintenance-free
No slip ring.
The lifetime of UTMⅡ is mainly determined by the lifetime of bearings.
-Max. speed 25000 rpm (0.05 to 10Nm)
-Small starting torque
The starting torque of the bearing in the UTMⅡ-0.05Nm is only 0.00001Nm (0.03 %FS).
Actually, the effect of rotating friction can be negligible.
-Smart system configuration with no external circuits needed
-Simultaneous detection of torque and rotating speed
Real-time dynamic measurement is possible from torque and rotation pulse signals.
Quality Check of Pumps (Oil pump, Tube pump, Vacuum pump and so on…)
■ Wide Capacity Range + Variety of Torque Monitors!
·Wide range: 0.05Nm to 10,000Nm
→For various automotive components: Motors, compressors, alternators, EPS unit, pumps, etc….
·UPM100 or TM301 to monitor torque, rotation speed, and power simultaneously!
·No slip rings
→No need to stop the machine to change brush
→Maintenance-free & efficient
→High rotation speed!
Wear/friction test of rubber products
■ Built-in Amplifier in the Compact Body!
·Compact to fit into limited space of a machine.
·Built-in amplifier: +/-5V
→No need of external amplifier
→Save the cost!
·High-accuracy: 0.03% Non-linearity
→Can be used for wear or friction test!
Torque-angle measurement of seat recliners
■ Easy to Perform Torque-Angle Measurement!
·Rotary encoder mounted on the shaft of UTMII
→No need to adjust the alignment of the rotary encoder.
·TM500 for “torque vs. angle” curve
→SD Card option to save the data
→RS-232C for connecting with PLC or PC
Quality check of hinges and dampers
■ High Accuracy & High Safe Overload!
·High-accuracy: 0.03% (non-linearity).
→Can be used for measuring very low torque (e.g hinge torque)
·Rotary encoder option for angle measurement.
·500% Safe overload
→Much safer!
→Ideal when high accuracy is required in low torque range!
Specifications
0.05Nm to 10Nm｜20Nm to 10000Nm｜Common specifications
|
0.05Nm to 10Nm |
Measurement range
Nm |
0.05 |
0.1 |
0.2 |
0.5 |
1 |
2 |
5 |
10 |
Option
(specifies at time of order) |
Rotary encoder |
Rotary encoder
Key groove |
Ext. dimension
(case size)
W
H
D
mm |
54
50
40 |
57
55
40 |
Total length
mm |
74 |
84 |
97 |
Shaft diameter
mm |
5 |
8 |
12 |
|
Power supply |
100mA or less |
|
Max. rotation speed |
25000rpm |
|
Approx. weight |
160g |
180g |
270g |
|
20Nm to 10000Nm |
Measurement range
Nm |
20 |
50 |
100 |
200 |
500 |
1000 |
2000 |
5000 |
10000 |
Option
(specifies at time of order) |
Rotary encoder
Key groove |
Key groove |
Ext. dimension
(case size)
W
H
D
mm |
70
68
51 |
67
74
57 |
67
79
62 |
67
79
72 |
86
103
98 |
86
119
111 |
97
141
137 |
103
166
162
|
Total length
mm |
150 |
170 |
177 |
187 |
217 |
286 |
306 |
387 |
447 |
Shaft diameter
mm |
20 |
25 |
30 |
40 |
60 |
70 |
90 |
110 |
|
Power supply |
150mA and less |
160mA and less |
|
Max. rotation speed |
20000rpm |
15000rpm |
12000rpm |
10000rpm |
7000rpm |
6000rpm |
5000rpm |
4000rpm |
|
Approx. weight |
700g |
1.1kg |
1.5kg |
2.6kg |
7.3kg |
10.5kg |
21.4kg |
36kg |
|
Common specifications |
|
Power supply |
DC24V ±15％ |
|
Output range |
±5V DC Load resistance must be more than 2kΩ |
|
Responsivity |
1kHz |
|
Rotation signal |
4 pulses per 1 rotation
Open collector Max. ratings 30V, 10mA |
|
Safe overload |
500%FS |
|
Non-linearity |
0.03%FS |
|
Hysteresis |
0.03%FS |
|
Repeatability |
0.03%FS |
|
Operation temp . range |
-10 to +50℃ |
|
Temp. effect on ZERO |
0.01%FS/℃ |
|
Temp. effect on span |
0.01%FS/℃ |
|
CE marking certification |
EMC directives EN61326-1,EN61326-2-3 |
iMS Motion Solution (Johor) Sdn Bhd (Company Registration 1098771-W)
No.7, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia.
TEL:+607-8635240 FAX: +607-8637240
MOBILE: +6019-6774477
HOTLINE : 1700-818-330
whatsapp us now !
Brand Name
| MEISTER | GGM | Sanyo Denki | ElectroCraft | EDrive | SHIHLIN ELECTRIC | AUTONICS | UI Robot | Mitsubishi CNC | PANASONIC| Apex Dynamics | NISSEI GTR | UNIPULSE | CREVIS
| MOTION DEVICES SPECIALIST | SYSTEM and CONTROL INTEGRATION |
| Induction Motor | Speed Control Motor | Reversible Motor |Brake Motor |BLDC Motor |DC Motor |Planetary Gear Motor | Servo Motor | Stepping Motor | Linear Actuator Motor | Lead Screw Motor|Close Loop Stepping Motor | Customization Motors | Right Angle Gear Head | Precision Gear Reducer |PLC | Motion Controller |HMI /Touch Screen| Inverter |CNC Controller |Multi Axis Robots |IPC | SCADA |Monitoring Software | Embeded PC | Remote IO |TPC | Motion Card | Loadcell |PPC |
Return / Refund Policy :
All goods sold are not returnable & we accept goods ex-change with equal or lower value of good purchased. If the ex-change items are higher than purchased items, buyer shall top up the differential cost. All payment made are not refundable, please confirm the purchase items code & cost with our sales representative before place orders.
Shipping and Fulfillment :
Thank you for your purchase. Once we have confirmed your payment, we will prepare and ship out your order out within 24-48 hours.( For ex-stock items only, Indent items subject to delivery stated in quotation & conversation in emails). Once your order has been shipped out, you will receive an email notification with the tracking number and tracking details inside.
Private Policy
General Statement of Principles
As described in detail below, any information we gather at this web site is strictly for our use and is not shared with any other entity, public or private, for any reason - period. We will not sell or give away any lists or other data that we may retain and we do not purchase such information from other sources.
Statistical Data
Our servers (as most) track IP addresses and referring pages to help with site maintenance and improvements. This data is viewed only as anonymous statistics to show the busiest times of the day or week, pages with errors and how effective our advertising has been. This information is not used for any other purpose.
Personal Information Collected - Order Forms
With the exception of credit card info, we store the information from your order form to allow us to track consulting issues or refer to a previous order to help provide some customer service. You may elect to have your information completely removed from this system by e-mailing us at [email protected] with your request. We do not store any type of sales information.
Information Correction or Removal
If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at [email protected] with the details of your request. If you wish to contact us further, please find complete contact information on our contact page.
Cookies
Cookies are files with small amount of data, which may include an anonymous unique identifier. Cookies are sent to your browser from a web site and stored on your computer's hard drive. We use 'cookies' to store your cart contents for you. You can instruct your browser to refuse all cookies or to indicate when a cookie is being sent. However, if you do not accept cookies, you may not be able to use the checkout section of our site.
Changes To This Privacy Policy
This Privacy Policy is effective as of 1st Jan 2019 and will remain in effect except with respect to any changes in its provisions in the future, which will be in effect immediately after being posted on this page.
Specifications
0.05Nm to 10Nm｜20Nm to 10000Nm｜Common specifications
|
0.05Nm to 10Nm |
Measurement range
Nm |
0.05 |
0.1 |
0.2 |
0.5 |
1 |
2 |
5 |
10 |
Option
(specifies at time of order) |
Rotary encoder |
Rotary encoder
Key groove |
Ext. dimension
(case size)
W
H
D
mm |
54
50
40 |
57
55
40 |
Total length
mm |
74 |
84 |
97 |
Shaft diameter
mm |
5 |
8 |
12 |
|
Power supply |
100mA or less |
|
Max. rotation speed |
25000rpm |
|
Approx. weight |
160g |
180g |
270g |
|
20Nm to 10000Nm |
Measurement range
Nm |
20 |
50 |
100 |
200 |
500 |
1000 |
2000 |
5000 |
10000 |
Option
(specifies at time of order) |
Rotary encoder
Key groove |
Key groove |
Ext. dimension
(case size)
W
H
D
mm |
70
68
51 |
67
74
57 |
67
79
62 |
67
79
72 |
86
103
98 |
86
119
111 |
97
141
137 |
103
166
162
|
Total length
mm |
150 |
170 |
177 |
187 |
217 |
286 |
306 |
387 |
447 |
Shaft diameter
mm |
20 |
25 |
30 |
40 |
60 |
70 |
90 |
110 |
|
Power supply |
150mA and less |
160mA and less |
|
Max. rotation speed |
20000rpm |
15000rpm |
12000rpm |
10000rpm |
7000rpm |
6000rpm |
5000rpm |
4000rpm |
|
Approx. weight |
700g |
1.1kg |
1.5kg |
2.6kg |
7.3kg |
10.5kg |
21.4kg |
36kg |
|
Common specifications |
|
Power supply |
DC24V ±15％ |
|
Output range |
±5V DC Load resistance must be more than 2kΩ |
|
Responsivity |
1kHz |
|
Rotation signal |
4 pulses per 1 rotation
Open collector Max. ratings 30V, 10mA |
|
Safe overload |
500%FS |
|
Non-linearity |
0.03%FS |
|
Hysteresis |
0.03%FS |
|
Repeatability |
0.03%FS |
|
Operation temp . range |
-10 to +50℃ |
|
Temp. effect on ZERO |
0.01%FS/℃ |
|
Temp. effect on span |
0.01%FS/℃ |
|
CE marking certification |
EMC directives EN61326-1,EN61326-2-3 |
更多 IMS Mechatronics Sdn Bhd 相关资料
Malaysia
