Airtac ACQ Air Cylinder

Airtac ACQ Air Cylinder

分类: Compact Cylinder 当前有货
欲了解更多详情,请游览我们的官方网站 prominent-supplies.com.my

详情

Product Feature

1.JIS standard is implemented.

2.C clip  is adopted to connect the cylinder body and back cover or front cover, and riveted structure is adopted to connect piston and piston rod to make it compact and reliable.

3.The internal diameter of the body is treated with rolling followed by the treatment of hard anodizing, forming an excellent abrasion resistance and durability.

4.The seal of piston adopts heterogeneous two-way seal structure. It has compact dimension and the function of grease reservation.

5.Compact structure can effectively save installation space.

6.There are magnetic switch slots around the cylinder body, which is convenient to install inducting switch.

7.Installing accessories with various specifications are optional.

Installation & Usage
 

1.When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.As both of the front cover and piston of the cylinder are short, typically too large stroke can not be ed.

7.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9.If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface.  Anti-dust caps shall be added in air inlet and outlet ports. The front and back cover can not be dismantled, which shall be especially noticed.

10.C clip Installation:

     10.1. Removal & Installation of C clip must be done with proper tool & care.

     10.2. Ensure C clip is securely fitted into the proper slot to prevent leakage.

Ordering code


Stroke                                  Bore Size                            
(mm) 12 16 20 25 32 40 50 63 80 100
5                    
10                    
15                    
20                    
25                    
30                    
35                    
40                    
45                    
50                    
55                    
60                    
65                    
70                    
75                    
80                    
90                    
100                    
110                    
120                    
130                    
140                    
150                    
175                    
200                    
250                    
300                    

Accessory 12 16 20 25 32 40 50 63 80 100
CB + PIN                    
LB                    
I                    
FA                    
Y + PIN                    


Symbol


 


更多 Prominent Supplies (M) Sdn Bhd 相关资料
Prominent Supplies (M) Sdn Bhd
Prominent Supplies (M) Sdn Bhd Compressed Air Treatment Penang, Air Dryer Supplier Malaysia, Pneumatic Components Supplies Perai ~ Prominent Supplies (M) Sdn Bhd