EK9i is designed for high security installations where security breaches cannot be compromised. This reader interface comes built in with a bright back-lit LCD and keypad to enhance system intuitiveness and user friendliness.
| Model | EK9i |
| Manufacturer | ELID Sdn Bhd |
| Country of Origin | Malaysia |
| Microprocessor | 16 bit MCU (MC9S12GC128) with 128K flash memory and 4K RAM |
| Bus Speed | 25.8048 MHz |
| Communication | 2 wires RS485 Interface (Data+, Data-) |
| Baud Rate | 9600bps or 57600bps |
| Protocol | Pier-to-peer collision detection protocol (E-BUS) |
| LCD Display | 16 by 1 line yellow-green screen without backlight or 16 by 2 lines blue screen with backlight |
| Keypad | 3 by 4 |
| Max. Doors Supported | 1 door |
| Standalone Operation | Partial. Can store 10 card numbers to open door when main controller is down. |
| Modes of Operation | Card, PIN, Card + PIN, Time Clock |
| Status Detection | Tamper, Battery and Alternating Current |
| Type of Reader Supported | Proximity (HID, EM, MiFare) |
| Max. Readers Supported | 2 (one IN and one OUT) |
| Onboard Inputs / Outputs | 6 Inputs, 2 Outputs |
| Operating Temperature | 0oC to 60oC |
| Humidity | 10% to 90% non-condensing |
| Power Requirements | 12VDC 100mA excluding reader |
| Casing Dimensions | 105 (L) x 80 (W) x 35 (D) |
| Casing Property | Heavy Duty PVC |
| Approximate Weight | 400grams |
Malaysia
