Jigsaw Blades, Tooth Pitch Sets, KEN2403320K

Kennedy® "Combi" Jigsaw Blade - Coarse Fine & Curve Cutting

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Double edged blade can be reversed in the machine to give the option of coarse cut or fine cut. Suitable for use on most woods, plastics, laminates etc. Reduced blade width also makes curve and profile cutting easier.
Supplied in cards of 5 blades.
Coarse Edge: 4mm Pitch x 70mm Effective Length
Fine Edge: 1.2mm Pitch x 40mm Effective Length