Flange Insulation Sets: 马来西亚的首选 Sceptre Power Sdn Bhd

详情

TEXSEAL

“TexSeal” gaskets are made with a special O-Ring sealing element inlayed in the face of the gasket. This O-Ring creates a very flexible seal that requires less bolt or stud torque to maintain constant contact with the flanges sealing surface surface.
TexSeal gaskets are available in both F and E styles.

The O-Ring seal and gasket are available in a wide variety of materials.

Type D gaskets are machined from a specified insulating material and are designed to fit ring joint type groove flanges.
BX gaskets are also available.

Available Materials: Hi-Temp G-3, G-7, G-10, G11, Phenolic
A 1/4” thick closed cell neoprene sponge flange protector is recommended to prevent the flanges from shorting out.

Type E gaskets offer complete protection for both flange faces. The gasket centers easily having the same outside diameter as the flange. This prevents foreign matter from accumulating between flange faces and shorting out the flanges

Type E-RTJ combination gaskets are are made with an insulating ring joint gasket and insulating inner and outer rings. This special design gasket offers complete protection for both flange faces. The RTJ gasket provides the seal, while the 1/32'' thick inner and outer barrier rings cover the I.D. to the O.D. This prevents foreign matter from accumulating between flange faces and shorting out the flanges. It is available in most sizes and materials

Type F gaskets are fabricated to fit the raised face portion of the flange face and are designed to center on the inside of the bolt circle.
We recommend that a flange protector made from 1/4” thick closed cell neoprene sponge be used to prevent foreign matter from collecting between the flange faces.

Selections

TexSeal Full Face Raised Face RTJ

Sealing
NS	Nitrile
TS	Teflon
VS	Viton
GS	Graphite
QS	Non-Asb

Gasket
G10	G-10 Epoxy/Glass
G11	G-11 Epoxy/Glass
HTG-3	High Temp
N	Nitrile Coated Phenolic
P	Phenolic
Q	Non-Asbestos
R	Red Rubber
RD	JM 940 (Red Devil)

Washers
SW	Single Washer
DW	Double Washer
Phenolic and Plated Steel Washers are standard
Other materials available on request are... G10 G11 HTG-3 (Hi-Temp 450°F) TexMica (Hi-Temp 932°F)

Sleeves
G10
G11
Integral (Minlon)
JM 940 (Red Devil)
Mylar
Nomex
Phenolic (Micarta)
Polyethylene (Poly)
Teflon

更多 Sceptre Power Sdn Bhd 相关资料