FC400-DAC-FA is a compact type indicator equipped with D/Aconverter & USB as standard features.
Suitable for force measurement in switches product testing and tablet press machine Multi-channel system built up in a network can be done easily.
It has displayable graph in the pc software, and setup can be done easily.
High-Speed A/D conversion and powerful digital processing capability of 2400 times/sec.. High display resolution of 1/100000 (max).
Measurement can be performed quickly and precisely due to high speed A/D conversion.
With communication through USB interface, logging, graph, display, setting parameters, and calibration can be done.
it can be fit into a limited space!
Lightvweing & compact body for 35mm DIN rail mount.
Theoretical calibration can be performed easily by registering the capacity and rated output of load cells.
OK / NOK judgement in fast process can be made.
The output signal level of load cell can be displayed in mV/V for monitor purpose.
24 bit A/D convertor enables 6 digit display.
Analog section｜Display section｜Hold functions｜External signal｜Interface｜General performance｜Attachments
| Analog section | |
| Excitation voltage |
DC5V±5% Output current: 90mA DC2.5V±5% Output current: 45mA(depending on settings) Ratiometric method (Up to 6 350Ω load cells can be connected in parallel) |
|---|---|
| Signal input range | -3.9 to 3.9mV/V |
| Zero adjustment range | Automatic adjustment by digital processing -3.0 to 3.0mV/V |
| Span adjustment range | Automatic adjustment by digital processing 0.01 to 3.8mV/V |
| Min. input sensitivity | 0.15μV/count |
| Accuracy |
Non-linearity: within 0.01%FS Zero drift: 0.0002%FS/℃ Typ Gain drift: 1ppm/℃ Typ |
| Filter |
Digital low-pass filter: 0.1 to 600 Hz Moving average filter: OFF, 2 to 999 times |
| A/D converter |
Speed: 2400 times/sec. Resolution: 24bit binary |
| Display section | |
| Display unit | Character height 8mm, Numerical display by 7-segment green LED |
|---|---|
| Display value | Up to 6 digits |
| Display frequency | Selectable from 1, 3, 6, 13, 25 times/sec. |
| Hold functions | |
| Hold | Sample,Peak,bottom,peak & bottom,average |
|---|---|
| External signal | |
| Output signal (5) |
Transistor’s open collector output Vceo=30V, Ic=50mA |
|---|---|
| Input signal (3) |
Selectable/configurable Input is ON when shorted to COM terminal by contact (relay switch, etc.) or non contact (transistor, open collector, etc.). * DC24V external power supply is required. |
| Interface | |
| USB | USB interface |
|---|---|
| DAC | D/A converter(Voltage and current output) |
| 485 | RS-485 interface (Selectable from Modbus-RTU or UNI-Format) |
| General performance | |
| Power supply voltage | DC24V (±15%) |
|---|---|
| Power consumption | 3W typ |
| Operating conditions |
Temperature: Operating temperature range: -10℃ to +50℃, Storage temperature range: -20℃ to +85℃ Humidity: 85%RH or less (non-condensing) |
| Dimensions | 34(W)×88(H)×91(D)mm (Projections excluded) |
| Weight | Approx. 210g |
| CE marking certification | EMC Directives EN61326-1 |
| Attachments | |
| Jumper cable | 2 |
|---|---|
| Mini driver | 1 |
| Various I/O connector | 3 |
| Quick manual | 2 |
|
Product catalogue(PDF)
|
FC400-FA catalogue(1 MB) | |
|---|---|---|
