-
Part can be used for BMW 3 Series E36 M3 3.0/ 3.2/ 316/ 323/ 328, 5 Series E34 518/ 520/ 525/ 530/ 524, E39 520/ 523/ 525/ 528/ 530/ 535/ 540, E60 520/ 523/ 525/ 530/ 540/ 545/ 550/ M5, 6 Series E63 630/ 645/ 650, 7 Series E32 730, E38 728/ 730/ 735/ 740, X5 Series E53 3.0 and Z3 E36 1.9/ 2.0/ 2.2/ 2.8/ 3.0.
-
Make sure that the base of the cylinder is clean and that there are no dirt or corrosion that could make it difficult to properly mount it.
-
The cylinder needs to fit into the base without being forced.
-
The push rod must be positioned in the center of the base on the lever that pushes the pressure plate.
-
The head of the push rod which couples the lever pushing the pressure plate, should not have any markings left from handling it which could impede the normal rotation. It is important that the push rod will be mounted in the required angle to reduce the abrasion of the seal, to avoid damages and to ensure the correct method.
-
Kindly drop us a message by providing your vehicle chassis number to avoid incompatible part.
Malaysia
