Glue, mastics and epoxy systems GL 80 (A+B) Low viscosity epoxy system for natural stones
GL EPOXY 80 is a low viscosity epoxy system with a deep power of penetration into the stone surface.
Not chemically charged and solvent free, therefore 100% reactive. The product hardens by room temperature.
GL EPOXY 80 has been studied to repair small and medium creeks in any type of marble, granite and natural stones.
CHARACTERISTICS AND BENEFITS
Excellent grip
Resistant to stains
USES
For indoor or outdoor use on marble, granite and natural stones.
COVERAGE
10/15 m2 /lt
MIXING RATIO
GL EPOXY 80 part A (resin): 100g
GL EPOXY 80 part B (hardener): 44 g
HARDENING TIME
HARDENING: 10-15 hours
COMPLETE CATALYSIS: 10-15 days
APPLICATION EQUIPMENT
Spatula, Brush, Roll
APPLICATION
Test on a small area before proceeding, so to ensure product suitability and final result. Always make preliminary tests to evaluate the colour change. Mix the two components carefully according to the recommended ratio. Variations in this ratio may compromise hardening and final properties of the product. Apply the product well mixed to an untreated surface, clean and dry and by temperatures not less than 10 °C.
Apply the product on a floor honed with 50 and 200 grit using a spatula, a brush or a roll being careful to apply a uniform coat of product to the whole of the area. Allow hardening for 15 hours at least before proceeding to the final phase of honing with grits 400 and 800 before polishing with powder.
The product enhances the colour of material and heightens the waterproof oil-repellent performances. For small isolated creeks, apply the product to the creek, wait for hardening and remove manually the excess up to a complete re-polishing of the area.
PACKAGING
GL EPOXY 80 part A (resin): 1000 ml bottles (12 per carton)
GL EPOXY 80 part B (hardener): 500 ml bottles (12 per carton)
Malaysia
