Specifications
- EXO pH Sensor Replacement Module Un-Guarded pH Module: Depth / Pressure Rating / Limit 250m (820ft)
Desktop Software Compatible KOR for EXO
Digital / Digital Sensors Yes
Equipment used with 599702
Measurement Range
0 to 14 units
Monitoring Yes
Precision
±0.1 pH units within ±10°C of calibration temp; ±0.2 pH units for entire temp range
(Within the environmental pH range of pH 4 to pH 10.)
Resolution
0.01 units
Response Time T63<3 sec (On transfer from water-saturated air to rapidly stirred air-saturated water at a specific conductance of 800 S/cm at 20°C; T63<5 seconds on transfer from water-saturated air to slowly-stirred air-saturated water.)
Smart Sensors / Ports Yes
User Calibratable Yes
User Replaceable Yes
Warranty
1 Year - Replaceable reagent modules for pH
Waterproof Yes, when installed
详情
Un-Guarded pH Module
User-replaceable tip for #599702 - EXO un-guarded pH sensor
Smart, cost-saving technology for water quality measurements.
Exhaustible reagents are stored in this replaceable module and can be swapped-out as needed. Electronics & data are stored separately in the smart sensor base. Grants long-term costs savings by eliminating the need to re-buy the entire sensor after the reagents are depleted (approximately 12-18 months for pH, depending on use).
Note:
- For use in EXO2 systems with a central wiper installed.
- EXO sensors and modules are not backwards compatible with 6-Series sondes.
更多 HSA ASIA SDN BHD 相关资料
Malaysia
