Measurement range (Resolution) 25um (0.002um), 100um (0.006um), 360um (0.02um), Auto
Detector measuring force:0.75 mN
Stylus tip angle: 60°
Stylus tip radius: 2 µm
Measuring method: Induction method
Stylus:Diamond Tip
Skid radius:40 mm
Measuring force:0.75 mN
Interface:RS-232 C interface for input/output,DIGIMATIC output,Compact flash card
Profiles:Primary Profile (P), Roughness Profile (R), DIN 4,776, MOTIF
Display range: Ra, Rc, Ry, Rz, Rq, Rt, Rmax*1, Rp, Rv, R3z, Rsk, Rku, Rc, RPc, Rsm, Rz1max*2, S, HSC, RzJIS*3, Rppi, R"a, R"q, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, λa, λq, L0, Rpm, tp*4
, Htp*4, R, Rx, AR, W, AW, Wx, Wte, Possible Customize
Roughness standard:EN ISO,VDA, ANSI, JIS
No. of sampling length (L):x 1, x 3, x 5, x L
Digital filter:2RC-75%, 2RC-75% (phase corrected), Gauss -50%
Cut-off length:lc: 0.08 mm; 0.25 mm; 0.8 mm;2.5 mm; 8 mm
ls: 2.5 µm; 8 µm; 25 µm
Printer: Thermal Printer (Printing width: 48 mm)
Statistics:Max/Min,Average value, Standard deviation (s), Pass Ratio, Frequency Distribution Table
Auto-sleep:Automatic after 5 minutes
Tolerance:Upper/lower limit values for three parameters
Mass:1.7 kg