详情
Description
The TP-XXL INFRARED is a closable mid-sized tool pouch in a new black and red color scheme. It is identical to other TP-XXL colorways and includes integral side-mounted padded pockets for separate meter or tool storage. The bag also features an external daisy chain for attaching pouches and accessories. The TP-XXL INFRARED also includes our proprietary V-SWAP™ system of interchangeable panels.
THE TP-XXL INFRARED BAG COMES WITH THE REAR TOOL PANEL, THE FRONT TOOL PANEL, AND THE 2-BIT & 4-BIT PANEL. YOU CAN PURCHASE MORE OF THESE ITEMS, AS WELL AS ADDITIONAL ADD-ON STORAGE ITEMS.
PRODUCT SPECIFICATIONS:
- Height (H): 15" (38cm)
- Width (W): 15" (38cm)
- Depth (D): 8" (20.5cm)
- Weight (empty): 7lbs/3.25kg
- Internal Volume: 710in3/12L
- Max Payload: 30lbs/14kg
- Tablet Pocket Dimensions:
- Height: 11"
- Width: 9"
- Depth: 1"
MAXIMIZED TOOL STORAGE CAPACITY:
- 47 available pockets
- INFRARED color scheme
- External daisy chain for attaching pouches and accessories
- V-SWAP™ removable tool pocket panel system
- Includes rear tablet pocket & 2 padded meter pockets
- “Hang-up” hook - accessible while open and closed
- Over-molded rubber grip
- Padded shoulder strap
- YKK® zippers
- High Impact Polypropylene plastic base
- 5 Year limited warranty
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
更多 Arvo Aircond & Refrigeration Tools Supply Sdn Bhd 相关资料
