Coldroom

 
TESCOOL Commercial Cold Room
The design and construction of commercial cold rooms using modular assembly is one of our fields of expertise. We are known internationally for the quality and scale of our cold rooms. We have worked within every sector of industry that requires cold room facilities including the automotive and food industries, pharmaceutical and research industries as well as the public services sector. Whatever you need, you can use our insulated panel products from the smallest project to the largest.  From a small Chiller or freezer to the big industrial cool rooms. Tescool supply cool room panels, fixtures, fittings and sealants, we can also build and specify your project. We can assist you from inception to completion. Once specified we then supply the insulated panels, fixtures and fittings to these exact specifications. And, if you wish, we can supply and build your cool room, cold room or other structure using one of our experienced installation teams. Our commercial refrigeration units are flat packed for easy handling and transport, and come complete with all accessories including doors, refrigerator drop in unit motors and compressors.
 
Modular Panels
TESCOOL panels are produced with the foamed-in-place process, where two chemicals are injected under pressure between two metal skins to form Polyurethane insulation panels. Chemical reaction produces high heat and high pressure during curing. Pressure of over 500 tons is applied to the panel resulting in high structural strength, high density and thus high insulation value of the Polyurethane panel. TESCOOL panels come in standard size but can be custom designed to fit your available space and your requirements. 

Panels are manufactured in sections and assembled at worksite like putting together pieces of puzzle. Panel width 400 to 1200mm, with length of 400 to 7000 mm. Ceiling, wall and floor are latched together using eccentric locks. Tongue and groove with Polyethylene gasket joint ensures that the installation is completely airtight. Butt joints panels are available on request.
 
 
 
Mental Finish and Thickness
TESCOOL panels are available with many types of metal finish to suit your job requirement, ranging from stainless steel, Color bond steel, Galvanized steel, Zincalume steel and Stucco aluminum. Metal finish is grooved every 5 inches to increase the structural strength and improve the look. Each panel is coated with scratch proof PVC film which protects panels finish during transportation and installation. The film can be peeled off after installation.
Polyurethane panel thickness is available from 60mm. to150mm. Table below shows TESCOOL panel thickness with corresponding specification. TESCOOL polyurethane panels are injected with blowing agent with low ODP (comply with Montreal Convention) and exceed UL 94 fire retardant standard. We regularly monitor and test our product, by independent laboratory, to ascertain that it meets our high standard.

TESCOOL hinged door is integrated into our standard wall panel. Our standard door size is 900 x 1900 mm. and 1000 x 2000 mm. The door comes complete with a door latch, a keyed cylinder lock, a safety door release from inside, self-closing mechanism, hydraulic door closer. The spring action integrated into the door hinge closes the door by itself if it is left open less than 90 degree. The hydraulic door closure latches the door tightly to prevent any cold air leakage.

Water proof light switch with vapor proof interior light is