Due to the popular demand of cement render texture, we bring you – Kreterra. Kreterra is a cement effect floor coating which can bring you the industrial and minimalistic effect without the problem of cracking and chipping off – usually caused by normal cement render.
7 Steps to build your dream floor!
GRINDING: Grind the floor to ensure a rough surface for moisture barrier application.
MOISTURE BARRIER: Mix Part A and Part B in 20L pail for 5 seconds, add component C, mix thoroughly for at least 2 minutes using a suitable electrical stirrer with helical paddle (with 750 watt high power mixure) until a smooth homogenous consistency is achieved. Spread the mixed MB with flat/notch trowel to the required thickness. Immediately after, use the spike roller to remove entrapped air to ensure the uniform thickness.
SANDING: After the surface driend for 24 hours, sand the surface with sandpaper (7 grit) to ensure a smooth surface. Remove the dust & the dirt from the surface.
PRIMER: Roll a layer of primer on the entire surface. Let it dry for at least 1 hour.
TEXTURE COAT: Scrape a layer of texture coat randomly on the entire surface. Let dry for 40 minutes. A second layer of texture coat may be applied to enchance the texture effects.
SANDING: After the surface dried, sand the surface with sandpaper (7 grit) to ensure a smooth surface. Remove the dust & the dirt from the surface.
TOPCOAT: Mix Part A & Part B of topcoat. Roll a layer of topcoat on the entire surface. Use a dry and clean roller to absorb the excess topcoat. Let it fully dry for 14 hours.
Features:
Low VOC & Odor Green choice, Water Basedand Eco-Friendly Easy maintenance
Formaldehye & Lead Free Easy touch up Anti-chalking & Efflorescence
Malaysia
