Things should not be done while installing a bearing on a shaft. Touching bearings with your bare hands is never a good idea. The use of talc-free finger cots or talc-free surgical gloves is recommended. Now let’s talk about how the bearing is removed from the shaft. The bearing removal method is done with a bearing puller for standard outer and inner rings, which may be obtained from a variety of manufacturers, including FEIKEN. A puller that pulls through the rollers should be used to remove bearings with a backing shoulder placed on the bearing. It also applied the pressure which can cause the raceway to expand and be easily removed. |
Things should not be done if removing a bearing from a shaft. If you want to retain the housing and other parts unharmed, don’t use a torch.Not cooling the bearing will cause the cases to shrink.Never put aluminium parts on any type of hot plate. It’s nearly impossible to heat uniformly, and much more difficult to keep the temperature under control. The maximum temperature you can reach is 400 degrees Fahrenheit. |